Abstract:On-chip generation of pressure gradients via electrokinetic means can offer several advantages to microfluidic assay design and operation in a variety of applications. In this article, we describe a simple approach to realizing this capability by employing a polyacrylamide-based gel structure fabricated within a fluid reservoir located at the terminating end of a microchannel. Application of an electric field across this membrane has been shown to block a majority of the electroosmotic flow generated within the open duct yielding a high pressure at the channel-membrane junction. Experiments show the realization of higher pressure-driven velocities in an electric field-free separation channel integrated to the micropump with this design compared to other similar micropumps described in the literature. In addition, the noted velocity was found to be less sensitive to the extent of Debye layer overlap in the channel network, and therefore more impressive when working with background electrolytes having higher ionic strengths. With the current system, pressure-driven velocities up to 3.6 mm/s were realized in a 300-nm-deep separation channel applying a maximum voltage of 3 kV at a channel terminal. To demonstrate the separative performance of our device, a nanofluidic pressure-driven ion-chromatographic analysis was subsequently implemented that relied on the slower migration of cationic analytes relative to the neutral and anionic ones in the separation channel likely due to their strong electrostatic interaction with the channel surface charges. A mixture of amino acids was thus separated with resolutions greater than those reported by our group for a similar analysis previously.

Application of a high-pressure electro-osmotic pump using nanometer silica in capillary liquid chromatography.

A New Electro-Osmotic Pump Based on Silica Monoliths

An Electro-Osmotic Micro-Pump Based on Monolithic Silica for Micro-Flow Analyses and Electro-Sprays.

A Fast Way to Make a Monolithic Column for a High Pressure Electroosmotic Pump

A Small Low-Pressure Electroosmotic Pump

Fabrication and Characterization of a Multi-Stage Electroosmotic Pump for Liquid Delivery

A New Monolithic Electrokinetic Pump with Bubble-Less Design

An integrated micropump and electrospray emitter system based on porous silica monoliths.

Ion Exchange Resin Bead Decoupled High-Pressure Electroosmotic Pump

Melt polymer drawn single and multi-capillary fibre-based electroosmotic pumps

Binary Electroosmotic-Pump Nanoflow Gradient Generator for Miniaturized High-Performance Liquid Chromatography.

Preparation and evaluation of C18-bonded 1-μm silica particle for pressurized capillary electrochromatography

Low‐voltage Efficient Electroosmotic Pumps with Ultrathin Silica Nanoporous Membrane

Electroosmotic pumps and their applications in microfluidic systems

Electrically Assisted Capillary Liquid Chromatography Using a Silica Monolithic Column.

On-chip pressure generation using a gel membrane fabricated outside of the microfluidic network

Preparation And Evaluation Of C18-Bonded 1-Mu M Silica Particles For Pressurized Capillary Electrochromatography

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Electroosmotic Pump-Supported Molecularly Imprinted Monolithic Column for Capillary Chromatographic Separation of Nitrophenol Isomers.

Study of Pulse Voltage Waveform Enabled Electroosmotic Pump for High Flow Rate and Bubble Free Purpose

Electroosmotic pumps for microflow analysis