Abstract:Alkali metal salt promoters, such as K2CO3 investigated in this work, are known to affect the cyclic performance of CaO-based sorbents - sometimes positively, sometimes negatively. Thus far, the influence of K2CO3 (and other salt-based promoters) is poorly understood, and detailed investigations on the interaction of K2CO3 with CaO are missing. We find that low amounts of K2CO3 in the sorbents improve the cyclic performance of CaO significantly (up to a factor of three), both under mild and harsh CO2 release conditions, while large amounts of K2CO3 (>1 mol.%) reduce the positive effect on the CO2 uptake performance. Aided by in-situ X-ray diffraction measure-ments, we observe that the gas environment has an important influence on the stability of K-containing phases in the sorbent. At typical carbonation conditions (650 degrees C, 15 vol% CO2/N2), CaO and K2CO3 readily form K-Ca double carbonates (K2Ca(CO3)2, which reacts further to form K2Ca2(CO3)3). When the calcination reaction is carried out in pure N2, the K-Ca double carbonates decompose above-730 degrees C, forming K2CO3 that becomes partially volatile near its melting point of-900 degrees C, and leads to a reduction of the K content in the samples with cycling. When the calcination reaction is carried out in a CO2-rich environment, the cyclic loss of K2CO3 is reduced substantially, but the sintering of the sorbent is increased. There are indications that very low quantities of K are incorporated into the CaO structure, and the formation of K-Ca double carbonates appears to influence the structural evolution of the CaCO3 phase formed during carbonation. With very low amounts of K2CO3 present in the sorbent, we observe an increase in pore volume for pore diameters between 20 and 80 nm, which ulti-mately may explain the improved CO2 uptake performance compared to the CaO sorbent without K2CO3.

Development of A Cao-Based Sorbent with Improved Cyclic Stability for Co2 Capture in Pressurized Carbonation

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Performance and Carbonation Kinetics of Modified CaO-Based Sorbents Derived from Different Precursors in Multiple CO2 Capture Cycles

Co2 Capture Performance of Calcium-Based Sorbents in A Pressurized Carbonation/Calcination Loop

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Enhanced cyclic stability of CO 2 adsorption capacity of CaO-based sorbents using La 2 O 3 or Ca 12 Al 14 O 33 as additives

Modeling of the Carbonation Kinetics of A Synthetic Cao-Based Sorbent

Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent

Enhancement of Attrition Resistance and Cyclic Co2 Capture of Calcium-Based Sorbent Pellets

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Co2 Capture Using Cao Modified with Ethanol/Water Solution During Cyclic Calcination/Carbonation

Attrition and Cyclic CO<Subscript>2</Subscript> Capture of CaO Pellets with Aluminates Under Pressurized Carbonation

Development of CaO-based Sorbent Doped with Mineral Rejects–bauxite-Tailings in Cyclic CO2 Capture

Development of Stabilized Ca-based CO2 Sorbents Supported by Fly Ash

Carbonation Kinetics of CO2 with CaO-Ca9Al6O18 Sorbent

Sol–gel-Derived Synthetic CaO-Based CO2 Sorbents Incorporated with Different Inert Materials

CO2 capture and attrition performance of CaO pellets with aluminate cement under pressurized carbonation

Studies on CO2 uptake by CaO/Ca3Al2O6 sorbent in calcium looping cycles

Manufacture of Calcium-Based Sorbents for High Temperature Cyclic CO2 Capture Via a Sol–gel Process

Investigation of K2CO3-modified CaO Sorbents for CO2 Capture Using In-Situ X-ray Diffraction

SGCS-made Ultrafine CaO/Al2O3 Sorbent for Cyclic CO2 Capture