Abstract:Silica aerogels have attracted widespread attention for their distinct nanoporous networks, composed of interconnected silica nanoparticles and high-volume nanosized pores. Nonetheless, producing silica aerogels with low costs and simple processes still remains a considerable challenge. Herein, the mesoporous silica aerogels were prepared from inorganic silicon source through the freeze-drying. Using sodium silicate as the silica precursor, the gel was formed by the ion exchange and sol-gel in sequence. The regeneration of the weak acidic ion exchange resin produced the sodium acetate solution, which can be potentially used as carbon source for sewage treatment. To eliminate the collapse of microstructure of the silica hydrogel during freeze-drying, the tert-butanol aqueous solution was used as the freeze-drying medium. Particularly, the direct mixing of tert-butanol and silica sol to generate wet gel avoids prolonged and material-consuming solvent replacement. The pore structure of mesoporous silica aerogel can be adjusted by changing the concentration of tert-butanol solution. The 18 wt% tert-butanol solution results in the most favorable mesoporous structure of silica aerogel, owing to the eutectic behavior within the gel, which was verified by differential scanning calorimetry (DSC) analysis, and also due to the superior and uniform mesoporous structure of wet gel, which was validated by the cryogenic scanning electron microscopy (cryo-SEM) observation. Under optimal process conditions, the obtained silica aerogel exhibited a high porosity (97.74%) and typical mesoporous structure with the large pore volume (4.84 cm3·g-1) and an average pore diameter of 24.40 nm. The proposed cost-effective preparation strategy could elevate the potentials for large scale applications of silica aerogels in the fields of thermal insulation for building, industrial catalysis and adsorption, etc.

Preparation of Cellulose Aerogel by the Salt-induced Gelation

Facile Preparation of Cellulose Aerogels with Controllable Pore Structure

Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution

Cellulose Aerogels Prepared from Cellulose/amimcl Solutions

Cellulose aerogels prepared from an aqueous zinc chloride salt hydrate melt

Transparent Cellulose Aerogels from Concentrated Salt Solutions: Synthesis and Characterization

MICRO-CELLULOSE PREPARATION METHOD BASED ON UREA/NaOH DISSOLVED SYSTEM

Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method

Preparation of mechanically strong and lightweight cellulose aerogels from cellulose-NaOH/PEG solution

High Mechanical Cellulose-Based Aerogel Induced by Fe 3+ at Ambient Temperature and Pressure

Aerogel-like (low density and high surface area) cellulose monoliths and beads obtained without supercritical- or freeze-drying

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

Graphene-Oxide-Sheet-Induced Gelation of Cellulose and Promoted Mechanical Properties of Composite Aerogels

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Preparation of a Novel Lignocellulose-Based Aerogel by Partially Dissolving Medulla Tetrapanacis via Ionic Liquid

Preparation of SiO2 aerogel by water glass: effect of different sodium removal methods on aerogel properties

Adjusting the pore size of nano-cellulose aerogel by heat treatment in the gel stage

Gelatin aerogel with good mechanical properties and adjustable physical properties for boron adsorption from salt lake brines: An optimized process

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

The aminosilane functionalization of cellulose nanofibrils and the mechanical and the CO2 adsorption characteristics of their aerogel