Abstract:Poly(3‐methylthiophene) and polypyrrole are used copolymer‐based gas sensors that are tested to 12 different volatile organic compounds. Sensors show very high sensitivity to the dimethyl methyl phosphonate and benzonitrile even very low concentrations (<1 ppm) and all tested analytes are selectively detected by assistance of several machine learning algorithm. The highest accuracy is handled for quadratic discriminant. In this work, the volatile organic compounds (VOCs) sensing properties of a quartz crystal microbalance (QCM) transducer coated with six different poly(3‐methylthiophene) (P3MT) copolymerized with polypyrrole (PPy) are investigated. The sensor preparation involves the electrochemical deposition of P3MT, PPy, and P3MT‐co‐PPy on Au‐coated QCM transducers by electrochemical deposition techniques with a three‐electrode cell. The structural properties of the copolymer films are characterized using scanning electron microscopy, and their oxidation/reduction behavior is investigated through cyclic voltammetry. The copolymer‐based QCM sensors exhibit high sensitivity and selectivity to dimethyl methyl phosphonate and benzonitrile, even at low concentrations (<1 ppm) at room temperature. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich adsorption isotherms are studied to understand the VOCs sensing mechanism machine learning classification algorithms including quadratic discriminant (QD), neural nets, K‐nearest neighbors, linear discriminant, and support vector machines are applied to classify the sensor responses for the 12 different analytes. With the help of machine learning algorithms, tested analytes are successfully classified into their groups. The highest accuracy of 97.34% is achieved using the QD method. The developed sensor, combined with machine learning algorithms, shows promising potential for accurate and reliable detection and classification of VOCs.

Characterization of the gas sensors based on polymer-coated resonant microcantilevers for the detection of volatile organic compounds.

High-performance Virtual Sensors Array Based on a Single-chip FBAR for Volatile Organic Compounds (vocs) Detection and Classification

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Microcantilever Sensor for the Detection Ofvolatile Organic Compounds

A Hybrid Wireless Electrodeless QCM-D for the Discrimination of Volatile Organic Compounds

A Wireless Electrode-Free QCM-D in a Multi-Resonance Mode for Volatile Organic Compounds Discrimination

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Trace Gas Sensor Based on Mems Cantilever Resonator

VOC Sensing Using Batch-fabricated Temperature Compensated Self-Leveling Microstructures

Gas sensing behavior of polyvinylpyrrolidone-modified ZnO nanoparticles for trimethylamine

Gas Microsensors Based on Polymer-Carbon Black Composites

A Room Temperature VOCs Gas Sensor Based on a Layer by Layer Multi-Walled Carbon Nanotubes/Poly-ethylene Glycol Composite

Trenched microwave resonator integrated with porous PDMS for detection and classification of VOCs with enhanced performance

Volatile Organic Compound Detection Using Nanostructured Copolymers

Silica Nanochannel-Based Interferometric Sensor for Selective Detection of Polar and Aromatic Volatile Organic Compounds.

Highly Sensitive and Selective Detection of Dimethyl Methyl Phosphonate with Copolymer‐Based QCM Sensors

VOCs Detection Based on Evanescent Wave Coupling of Dye-Coated Optical Fiber

Investigation of Gas Microsensors Array Based on Polymer-Carbon Black Sensitive Film

MEMS-Based Ionization Gas Sensors for VOCs with Array of Nanostructured Silicon Needles

Electrothermal Driving Microcantilever Resonator As a Platform for Chemical Gas Sensing

Ultrasensitive Surface Acoustic Wave Gas Sensor for Trace VOCs Detection Based on Sensing Mechanism of Gas-Liquid Phase Transition