Abstract:The hot rolled strips for internal plates of automobile was developed by taking the technologies of low-carbon softening steel, including strictly control the chemical composition content during the steel melting and optimization of the rolling processes in the thin slab continuous casting and rolling line. The results showed that when carbon content was 0.04%, adding aluminum content or reducing silicon content and manganese content, reducing the reduction in previous rolling passes and increasing the reduction of the finishing pass at high temperature was beneficial for reducing the yield strength and tensile strength of the hot rolled strips. The precipitate of the samples after annealing showed that the precipitate of aluminum-nitride increased significantly at 850°C. And the texture of the samples after annealing showed that the main texture was {110} and its intensity was 1.7-2.0, annealing with hot rolled strips did not benefit the advantageous texture. Tension-tension fatigue properties of hot rolled strips and cold rolled ones were determined, the results showed that the fatigue properties of hot rolling strips were rather higher than that of cold rolled ones. In the stamping experiments of some automobile parts, there was not any drawback, and the forming properties of hot rolling strips were equal to that of cold rolled ones. It was feasible to replace the cold rolled strips with the hot rolled ones for the internal plates of automobile.

Characteristics of Hot Rolled H-beam Process in China

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

Development of Rolling Technology and Equipment of Long Products(1)——Rail and Heavy H-beam

A Study on DC01 Steel Strip to Improve the Elongation Properties and Batch Annealing Process

Recent Progress in Steel Rolling Technology in China

Steel Rolling Technology Progress in China in the Past Ten Years

Intelligent Research and Upgrade of Narrow-band Hot-rolled Steel Production Workshop

Temperature Influence on Section Uniformity of Casting Steel Rolled with the Hot-Core Heavy Reduction Rolling Process and Traditional Hot Rolling Process

Representative Technologies for Hot Charging and Direct Rolling in Global Steel Industry

Production Practice of Rolling 8mm Thickness Plate by 4300mm Heavy Plate Mill

Modified Design of Roll-box for Three-roller Cross-rolling Mill

Advancement and Development of Steel Rolling Technologies in China(1)

NONLINEAR THREE-DIMENSIONAL SIMULATION FOR HOT CONTINUOUS ROLLING OF STRIP STEEL

Influence of hot-core heavy reduction rolling on microstructure uniformity of casting billet

Advanced Heat Treatment Equipment Technology And Product Development of Metal Materials

Advancement and Development of Steel Rolling Technologies in China(2)

The Mechanism of Forming Hollow Shafts with Constant Wall Thickness by Three-Roll Skew Rolling

Analysis and Improvement of H-beam for Offshore Oil Platform Production Process

State-of-the-Art and Development Trends of HSLA Steels in China

Development of Hot Rolled Strips for Internal Plates of Automobile