Abstract:This paper presents the results of experimental and numerical investigation of forced convection of gas flows through stainless steel microtubes having inner diameters of 750 mu m, 510 mu m and 170 mu m. The study covers both transitional and turbulent flow regimes (3000<Re<12000). In these regimes the flow is highly compressible, inducing conversion from thermal energy to kinetic energy inside microtubes. Moreover, reverse energy conversion takes place immediately after the fluid is vented to the outlet chamber where the measurement of fluid outlet temperature is performed. In this work the effects of fluid compressibility on the forced convection at microscale is quantitatively discussed by combining experimental data with numerical predictions. It is evidenced that compressibility effects can distinctively enhance convective heat transfer in terms of Nusselt number. This enhancement turns out to be more pronounced for microtubes with smaller inner diameter even at medium Reynolds numbers. In order to explore in-depth the heat transfer mechanism, the system is numerically simulated adopting the Arbitrary-Lagrangian-Eulerian (ALE) method and the Lam-Bremhorst Low-Reynolds number turbulence model to evaluate eddy viscosity coefficient and turbulence energy. The crossing of the numerical data, which provide the local value of pressure and temperature, with the experimental ones helps to explain the physical sense of the experimental results. In addition, the convective heat transfer coefficients obtained in the present work are compared with both classical correlations validated for conventional pipes and the correlations proposed for gas flows through microtubes.

Numerical Simulation of Gas Through PMMA Tube

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Simulation of Transmission Probability for Molecular Gas Flow Through Vacuum Pipe with Equivalent Heat Radiation Model

A numerical study of high moisture flue gas in tube banks

Numerical Simulation of Turbulent Pulsating Flow and Heat Transfer in Tubes

Numerical Simulation and Experimental Study on Radiation Heat Transfer in Flame Tube

Numerical Simulation of Coupled Radiation‐convection Heat Transfer of High‐temperature Developing Flow in Tube

Numerical Simulation of Laminar Pulsating Flow in Tubes

Numerical Studies of Simultaneously Developing Laminar Flow and Heat Transfer in Microtubes with Thick Wall and Constant Outside Wall Temperature

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes

A Numerical Study of Thermal Degradation of Polymers: Surface and In-Depth Absorption

Numerical Simulation of High Temperature Transpiration Cooling in Cylindrical Porous Channels

Numerical Simulation of Steam Condensation in Vertical Tube with the Presence of Non-condensable Gas

Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal‐Foam Tubes

Development and Validation of Numerical Model of Condensation Heat Transfer and Frictional Pressure Drop in a Circular Tube

Numerical Simulation of Micro-Combustion for Different Heat Loss Conditions

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

A Visual Experimental Study on Surface Temperature Field in Stainless Steel Microtube

NUMERICAL SIMULATION OF ENHANCED CONVECTION HEAT TRANSFER USING METHANE-STEAM REFORMING IN CATALYST FILMS IN A VERTICAL TUBE

Numerical Simulation of Heat Transfer in Tubular Loop Reactor