Abstract:Pure tungsten (W) is generally believed to be a preferred alternative material for kinetic penetrators once a "self-sharpening" effect can be realized by inducing adiabatic shear failure during high-speed impact. However, it is still a major challenge to trigger adiabatic shear bands (ASBs) in pure W with low ductility. In this work, we reported an improved adiabatic shear susceptibility of pure W by controlling the texture evolution during the pre-rolling process. As the rolling strain increased, the texture components and intensity underwent crucial variations to facilitate the appearance of ASBs. For comparative studies, we investigated the dynamic behavior of three kinds of W samples with different microstructural features at a wide range of temperatures (298K∼1473K) via SHPB system, including coarse-grained W (CGW), as-rolled W samples to the thickness reductions of 75% (75W) and 80% (80W). The experimental results revealed a transition of failure behavior from typical brittle fracture to adiabatic shear instability under uniaxial dynamic compression. Of particular interest was that although 75W and 80W exhibited almost the same mechanical properties after the similar rolling reductions, their dynamic instability behaviors differed remarkably with different spatial distributions of texture components. In the as-rolled 75W, two dominant texture components of {001} and {111} were alternate to form fully spaced layers. Under uniaxial compression, the {111} "hard orientation layers" became the obstacles to the propagation of ASBs. Fortunately, in 80W specimens the different {001} "soft orientation layers" were interconnected by the "soft bricks" of the same orientation, which provided pathways for the expansion of shear localization and ultimately the triggering of ASBs. Through subsequent crystal plasticity finite element (CPFEM) simulations, we further verified the effect of orientation distributions on the shear localization and thoroughly explained the formation mechanism of ASBs in the highly textured refractory metal. This may provide guidance for producing advanced materials for certain practical applications.

Effect of Fibrous Orientation on Dynamic Mechanical Properties and Susceptibility to Adiabatic Shear Band of Tungsten Heavy Alloy Fabricated Through Hot-Hydrostatic Extrusion

Influence of Microstructure on Adiabatic Shear Localization of Pre-Twisted Tungsten Heavy Alloys

Tailoring the adiabatic shear susceptibility of pure tungsten via texture evolution

Influence of Hot Extrusion on Microstructure and Mechanical Properties of Tungsten Based Heavy Alloy

Microstructure and mechanical properties of high density tungsten alloy and its influence factors

Influence of Stress Condition on Adiabatic Shear Localization of Tungsten Heavy Alloys

FORMATION MECHENISM OF ADIABATIC SHEAR BAND IN TUNGSTEN HEAVY ALLOYS

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

High susceptibility to adiabatic shear banding and high dynamic strength in tungsten heavy alloys with a high-entropy alloy matrix

Effect Of Heat Treatment On Microstructure And Mechanical Properties Of Hot-Hydrostatically Extruded 93w-4.9ni-2.1fe Alloy

Tem Characterization of the Microstructure of Hot-Hydrostatically Extruded 93W-4.9Ni-2.1fe Alloy

Microstructure and Mechanical Properties of a Hot-Hydrostatically Extruded 93w–4.9ni–2.1fe Alloy

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

Tensile Behaviors of Rolled and Annealed 90w7ni3fe Alloy

Deformation Stored Energy and Dynamic Recrystallization Behavior of Pure Tungsten Processed by Multiple Directional Forging

Research on Microstructure, Mechanical Properties, and High-Temperature Stability of Hot-Rolled Tungsten Hafnium Alloy

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Effect of High Strain Rate on Adiabatic Shear Susceptibility and Microstructures in Al0.4CoCrFeNi High-Entropy Alloy

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Dynamic shear behavior of forged CrMnFeCoNi high entropy alloy using hat-shaped specimens over a wide range of temperatures and strain rates

Effect of Anisotropic Mechanism of W-2%wt Y2O3 Alloy on DBTT and Fracture Analysis under Small Punch Testing