Resonant Frequency Shift of Stay-Cable Influenced by Using MR Dampers

WU Zhehua,LOU Wenjuan,CHEN Yong,ZHU Yaohong,TANG Jinchun

DOI: https://doi.org/10.3969/j.issn.1000-1301.2007.06.036

2007-01-01

Abstract:The dynamic response performances of a cable with MR dampers are explored in detail using Spencer photometric model.Some factors such as MR dampers(marker,mounting position and voltage applied),the first frequency of cables(tensile force,length and mass per unit length),exciting loads(type,frequency and amount) having influence upon resonant frequency shift of stay-cable are discussed.The discrete MR dampers were installed on the 154m-long cable near the anchorage in the 3rd Qianjiang cable-stayed bridge.Vibration mitigation of the cable using MR dampers in a purely passive mode,where constant levels of current are supplied to the damper,is examined by a series of free vibration tests and compared to that of using oil dampers.The displacement signal is driven by harmonic planar loads,filtered through wavelet decomposition and transformed by Hilbert.The relationship between the system frequency,the voltage imposed and displacement responses at the point of cable was pursued.Then the 330m length cable in the Hangzhou Bay Bridge using passive and semiactive control was calculated.It is shown that frequency shift attributed to MR dampers has a little change and is higher than oil dampers do.So the method installed MR dampers can be achieved not only consuming energy dissipation but also tuned frequencies of the cable.