Abstract:The free-bending process of a metal tube involves a geometric relationship between the eccentricity, the rotation angle of the bending die, the deformation zone length, and the bending radius. Ideally, during the forming process, the contact position between the bending die, and the outer bend of the tube remains tangent. However, due to factors such as the clearance of the bending die and material properties, the rotation angle can be adjusted within a specific range while still ensuring smooth tube formation. The tangential state is disrupted when the rotation angle changes, resulting in overbending or underbending. Thus, in this study, a new theoretical analysis of the free bending process, accounting for clearance, was developed to analyse the material flow and changes in the bending radius during the nontangential contact between the bending die and the tube. In addition, the reasons for achieving smooth tube bending even after adjusting the rotation angle were explained, and the deformation mechanism of the tube under the combined effects of additional tangential force from the bending die and axial propulsive force was analysed. Furthermore, the impact of the rotation angle on the bending radius and the displacement of the strain neutral layer (strain NL) was determined. Afterwards, finite element (FE) modeling and forming experiments were conducted to verify the proposed theoretical analysis under different deformation zone lengths and eccentricities conditions. Besides, the distribution of the inner and outer wall thicknesses of the tube under the nontangential rotation of the bending die was further analysed. The simulation and experimental results fit well with that obtained from theoretical analysis.

The Research of Process Knowledge Database for Tube NC Bending

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Springback law of high-strength 21-6-9 stainless steel tube in numerical control bending under different process parameters

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Toward Axial Accuracy Prediction and Optimization of Metal Tube Bending Forming: A Novel GRU-integrated Pb-NSGA-III Optimization Framework

Effect of die structure parameters on deformation behavior of bent tube in free bending process

Bending Process Parameters Optimization of the 316L Tube with Small R/D Ratio: A Physical Prior Knowledge Based Bayesian Optimization Approach

Research on the Mechanism and Processability of Roll Forming

Diameter-adjustable mandrel for thin-wall tube bending and its domain knowledge-integrated optimization design framework

Process parameters optimization of differential heating push-bending for small bending radius tube based on orthogonal experiments

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

Approach Based on Response-Surface Method to Optimize Lining of Dies Used in 3D Free-Bending Forming Technology

Finite Element Analysis of Seamless Steel Tube NC Bending

Spiral Metal Tube Multi-Roller Bending Springback Prediction Model Based on Dynamic Deformation Enhancement Analysis

Spring-Back Prediction of the Bi-Layered Metallic Tube under CNC Bending Considering Neutral Layer Shifting Extraction

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending

ADVANCED PLASTIC PROCESSING TECHNOLOGY AND RESEARCH PROGRESS ON TUBE FORMING

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Smart Control of Springback in Stretch Bending of a Rectangular Tube by an Artificial Neural Network

Cross-sectional Performance Prediction of Metal Tubes Bending with Tangential Variable Boosting Based on Parameters-Weight-adaptive CNN.

Towards high-accuracy axial springback: Mesh-based simulation of metal tube bending via geometry/process-integrated graph neural networks