Abstract:The global demand for renewable energy sources has intensified the quest for innovative and inexpensive solar cell technologies. Employing thin crystalline silicon (c-Si) is of great interest in these advancements. Here, integration of organic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and nanostructured thin-flexible Si wafer (~50 μm) is investigated to harness their synergies in fabricating mechanically flexible hybrid heterojunction solar cells (HHSCs). Flexible Si wafers are prepared through alkali etching followed by SiNW on single side of the thin wafers using single-step silver (Ag)-assisted chemical etching (Ag-ACE) process at room temperature. The SiNW incorporated flexible solar cells produced an impressive power conversion efficiency (PCE: 9.0%) even in the simple design owing to enhanced light absorption in broad spectral range. It is found that SiNW length and polymer layer thickness play critical role in defining the trade-off among the optoelectronic, junction and solar cell parameters. The SiNW of 170±20 nm length and PEDOT:PSS of 100±10 nm layer is the optimal combination for the best solar cell parameters. The enhanced light trapping and charge generation rate are also confirmed by finite-difference time-domain (FDTD) simulation. Detailed analysis of light trapping, junction properties, surface passivation, device performance parameters and their co-relation have been discussed. Our study demonstrates the SiNW-incorporated flexible and efficient PEDOT:PSS/n-Si HHSCs, which can lead to not only the advancement of low-cost photovoltaics but also offer potential for diverse applications, from portable electronics to wearable technology.

Electrochemical fabrication of p-poly(3-methylthiophene)/n-silicon solar cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Heterojunction Photovoltaic Devices Utilizing Single Wall Carbon Nanotube Thin Films and Silicon Substrates

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

P-silicon Thin Film Fabricated by Magnetron Sputtering and Aluminium Induced Crystallization for Schottky Silicon Solar Cells

Electrochemical fabrication of a P-type silicon?polythiophene p?n junction diode

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Enhancing Conductivity in Silicon Heterojunction Solar Cells with Silver Nanowire-Assisted Ti3C2Tx MXene Electrodes for Cost-Effective and Scalable Photovoltaics

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Fully Textured, Production‐line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite

Polythiophene/fullerene Bulk Heterojunction Solar Cell Fabricated Via Electrochemical Co-Deposition

Self-generation of a quasi p–n junction for high efficiency chemical-doping-free graphene/silicon solar cells using a transition metal oxide interlayer

Tuning Recombination and Charge Separation in a n/p/p Heterojunction Solar Cell with CZTS, Ag3SbS3 and a Carbon Interlayer

Solution-processed silicon/SnCl2-treated Ti3C2Tx MXene Schottky junction solar cells