Abstract:A simple, rapid, sensitive, accurate, and automatic graphite furnace atomic absorption spectrometry (GFAAS) method for detecting Cd and Pb in cereals is presented. This method enables the simultaneous determination of Cd and Pb in cereals with a pre-treatment method of diluted acid extraction and a high-performance lead–cadmium composite hollow-cathode lamp (LCC-HCL), and it realizes automatic determination from sample weighing to result output through an automatic diluted acid extraction system. Under the optimization, Pb and Cd in cereals were simultaneously and automatically detected in up to 240 measurements in 8 h. The LOD and LOQ of this method were 0.012 and 0.040 mg·kg−1 for Pb, and 0.0014 and 0.0047 mg·kg−1 for Cd, respectively. The results of the four certified reference materials were satisfied; there was no significant difference compared with the ICP-MS method according to a t-test, and the RSDs were less than 5% for Cd and Pb. The recoveries of naturally contaminated samples compared with the ICP-MS method were favorable, with 80–110% in eight laboratories. The developed method is rapid, low-cost, and highly automated and may be a good choice for grain quality discrimination and rapid analysis of Cd and Pb in different institutions.

Evaluation of Uncertainty in Determination of Cadmium in Meat Products by GFAAS

Uncertainty evaluation of determination of emamectin benzoate residues in the water bamboo by high performance liquid chromatography-tandem mass spectrometry

Evaluation of Uncertainty of Measurement of Copper in Soil by FAAS

Rapid, Simultaneous, and Automatic Determination of Lead and Cadmium in Cereals with a New High Performance Composite Hollow Cathode Lamp Coupled to Graphite Furnace Atomic Absorption Spectrometry

Determination of aluminium in puffed food by graphite furnace atomic absorption spectrometry

GFAAS Determination of Trace Amount Cadmium in Chitosan

Determination of Trace Cadmium in Leather Products by Graphite Furnace Atomic Absorption Spectrometry

Determination of Metallic Element in Soybean Coat by Fermentation-Microwave Digestion-Microwave after Semi-Ashing Plasma Torch Atomic Emission Spectrometry

Development of an analytical method for determination of lead and cadmium in biological materials by GFAAS using Escherichia coli as model substance.

Uncertainty Evaluation for the Results from the Preparation of Cadmium Standard Solution

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

Simultaneous Determination of Trace Cadmium and Arsenic in Grains Using Atomic Absorption Spectrophotometry

Determination of Trace Elements in Tea by Suspension Sampling-Flame Atomic Absorption Spectrometry

Solvent microextraction-flame atomic absorption spectrometry (SME-FAAS) for determination of ultratrace amounts of cadmium in meat and fish samples

Accurate Determination of Trace Cadmium in Soil Samples with Graphite Furnace Atomic Absorption Spectrometry Using Metal–Organic Frameworks as Matrix Modifiers

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Comparison of Pretreatment Condition of Cadmium in Fish Sample and Diet by Microwave Digestion Method for ICP-AES

Uncertainty Evaluation for Determination of Trace Elements in Rock by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Selenium in Tobacco and Tobacco Products with Microwave Digestion-Graphite Furnace Atomic Absorption Spectrometry

Direct determination of cadmium in geological samples by slurry sampling electrothermal atomic absorption spectrometry

FAAS Determination of Trace Amounts of Lead and Cadmium in Feed Additive with Solvent Extraction