Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

Research Advances of Improving Thrust Power of Inchworm-Type Piezoelectric Linear Actuators

A Single-Clamp Inchworm Actuator with Two Piezoelectric Stacks

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

Design and Development of a Piezoelectric Linear Actuator for Smart Structures

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Research and Application of Technology for a New Piezoelectric Ceramic Actuators

Development and test of a high speed pusher-type inchworm piezoelectric actuator with asymmetric driving and clamping configuration

A 2-Dof Piezoelectric Inchworm Actuator for Precise Positioning

Modeling and Design Optimization of a New Piezoelectric Inchworm Actuator with Screw Clamping Mechanisms

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Analysis and Experimental Research of a Multilayer Linear Piezoelectric Actuator

An Inchworm Type Piezoelectric Actuator Working in Resonant State

Linear Inchworm Mechanism Based on Giant Magnetostrictive and Piezoelectric Materials

Piezoelectric Actuators and Motors: Materials, Designs, and Applications

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes

A novel stick-slip piezoelectric rotary actuator designed by employing a centrosymmetric flexure hinge mechanism

Enhanced velocity and weight-bearing capability of piezoelectric viscous-slip actuators utilising a pentagonal flexible hinge configuration

Piezoelectric Actuator and Its Application in Hydraulic Valves