Abstract:Optimal design of the crossbeam is essential for the economical design of bridge towers as the crossbeam could considerably enhance the lateral stiffnesses of these towers by providing a special bracing for the tower columns. By using a reliability-based approach, this paper studies the optimal design of the crossbeam stiffness factor in bridge towers; this is defined as a dimensionless crossbeam stiffness relative to the tower column stiffness. A novel second-order matrix stiffness method (MSM) is applied to obtain a closed-form solution of the lateral stiffness of the bridge tower. The structural second-order stiffness matrix consists of combinations of the second-order element stiffness matrices and coordinate transformations. Subsequently, a reliability analysis to study the optimal design of the bridge tower is performed by considering the uncertainties arising from the design and construction of the bridge tower. The lateral stiffness of the bridge tower is set as an objective function while the total usage of materials is set as a constraint condition. Then, the influence of the crossbeam stiffness factor on the lateral stiffness of the bridge tower, including the fragility curve and the probabilistic behavior, is examined. Based on the reliability analysis, optimal design recommendations on the crossbeam stiffness of the bridge tower are presented.

Research into the defect of crossbeam prestress of cable-stayed bridge with tower beam consolidation

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Analysis of Defect Causes of Precast Segmental Prestressed Concrete T-Frame Bridge and its Experimental Study

Study On Optimal Construction Method For Lower Beam Of Cable-Stayed Bridge Towers

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Stiffness Degradation Characteristics Destructive Testing and Finite-Element Analysis of Prestressed Concrete T-Beam

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Simulating analysis of cantilever casting of prestressed concrete bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Analysis and strengthening of superstructure diseases of concrete bridges in China

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Optimal Design of Crossbeam Stiffness Factor in Bridge Towers Using a Reliability-Based Approach

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Influence of effect of creeping of the long span prestressed concrete cable-stayed bridge on internal forces in structural health monitoring

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge