Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Surface functionalization of polypropylene by entrapment of polypropylene-<i>grafted</i>-poly(ethylene glycol)

Polypropylene Surface Modification by Entrapment of Polypropylene-Graft-Poly(Butyl Methacrylate)

Synthesis and Characterization of A Macromolecular Surface Modifier for Polypropylene

Surface Modification of Polypropylene. I. Surface Enrichment of Poly(Ethylene Glycol) on Polypropylene/Poly(Ethylene Glycol) Blends

Surface Enrichment of Polypropylene-Graft-Poly(Methyl Methacrylate) on Polypropylene

Surface Modification of Polypropylene by the Entrapping Method Using the Short-Chained Stearyl-Alcohol Poly(Ethylene Oxide) Ether Modifier

Biocompatible Polypropylene Prepared by a Combination of Melt Grafting and Surface Restructuring

Surface functionalization of low density polyethylene films with grafted poly(ethylene glycol) derivatives

Synthesis and Characterization of Polypropylene-Grafted-Poly(Methyl Methylacrylate) Copolymers

Enrichment of Poly(Butyl Methacrylate) and Its Graft Copolymer of Polybutadiene on the Surface of Polypropylene Blend

Synthesis and Characterization of Polybutadiene-grafted-Poly(Butyl Methylacrylate) Copolymers

Effect of Processing Conditions on Surface Hydrophilicity of Polypropylene Modified by Macromolecular Surface Modifiers

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Surface functionalization of polypropylene film via UV-induced photografting of N-vinylpyrrolidone/maleic anhydride binary monomers

Amphiphilic PPESK-graft-P(PEGMA) copolymer for surface modification of PPESK membranes

A Study of Surface Functionalization of PP Nonwoven Cloth

Surface Modification of Poly(tetrafluoroethylene) Films Via Grafting of Poly(ethylene Glycol) for Reduction in Protein Adsorption

A Mechanistic Investigation of the Directional Entrapping Modification on the Semicrystalline Polypropylene Surface

Construction of Glycosylated Surfaces for Poly(propylene) Beads with a Photoinduced Grafting/Chemical Reaction Sequence

A Facile, Green, Versatile Protocol To Prepare Polypropylene-G-Poly(Methyl Methacrylate) Copolymer By Water-Solid Phase Suspension Grafting Polymerization Using The Surface Of Reactor Granule Technology Polypropylene Granules As Reaction Loci

Grafting of Telechelic Poly(lactic‐co‐glycolic Acid) Onto O2 Plasma‐treated Polypropylene Flakes