Abstract:The laser rapid forming (LRF) as an advanced solid freedom fabrication technology, has been developed rapidly in recent decade By rapid prototyping with laser cladding. LRF realizes the direct net shaping of the components with irregular shapes and fine inner structures, and gives a short-route, low-cost and high-flexibility fabrication of aero components, aero-engine parts and biomedical implants In the LRF inciting and solidification are happened in a dynamic non-equilibrium, high temperature gradient and rapid solidification manner, so that the microstructure of the laser rapid formed part, is finer than that of ordinary cast or forge part and presents a characteristic of typical epitaxial growth Therefore, to achieve the predict and control of the microstructure evolution is a key problem Much efforts have well devoted to narrating the solidification and crystallization in melting pool, but little attention has been paid to study the microstructure of part. In this paper: the evolution of temperture field and solidification of LRF part were concerned, the relationship, between as-deposited microstructure and the local solidification conditions such as solidification velocity and temperature gradient of moving melting pool were also investigeted. A coupled 2D transient finite element LRF epitaxial growth model was developed The morphology evolution and first, order dendrite arm space lambda(1) distribution in 2.8 mm high LRF 316L stainless steel wall were simulated. The results show that the microstructure of LRF 316L stainless steel wall is mainly columnar austenitic dendrites, and the lambda(1) gradually becomes larger from the bottom about 6.5 mu m to the top about 17 mu m which is in good agreement with the experimental further more, on the basis of the validated model, morphology evolution and lambda(1) distribution in 40 mm high LRF 316L stainless steel wall are also predicted.

Numerical Simulation for Temperature Field of TC4 Titanium Alloy Hollow Blade during Laser Rapid Forming Process

Temperature/Stress Field Numerical Simulation of Hollow Blade Produced by Laser Rapid Forming

Numerical Simulation of Three-dimensional Temperature Field in Laser Melting Process

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Numerical Simulation of Transient Temperature and Axial Deformation During Linear Friction Welding Between TC11 and TC17 Titanium Alloys

Cooling Process Of Titanium Alloy Blades After Combustion Using Three Dimensional Heat Flow Coupling Numerical Simulation

NUMERICAL MICROSTRUCTURE SIMULATION OF LASER RAPID FORMING 316L STAINLESS STEEL

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Competition Growth of Α and Β Phases in Ti-50 At.%al Peritectic Alloy During the Rapid Solidification by Laser Melting Technique

Softening Behavior and Mechanism of Laser Rapid Forming Ti-6Al-4V Alloy Deformed at the High Temperature

RESEARCH ON INFLUENCE OF TEMPERATURE ON A PRECISION FORGING PROCESS OF BLADE WITH A TENON

Temperature Field Simulation of Electron Beam Cold Hearth Melting TC4 Alloy

Temperature Field Simulation On Ti6a14v And Incone1718 Heated By Continuous Infrared Laser

The Simulation Of Temperature Field In The Laser Forming Of Steel Plates

Numerical Simulation of Hot Forging Process for TC4 Blade

Temperature Measurement and Microstructure Control for Rene88DT Superalloy During Laser Rapid Forming

Numerical Simulation of Interaction Between Metal Powder and Melting Pool During Laser Rapid Forming

Numerical Simulation on Temperature Field of Laser Deep Penetration Welding of GH4133 Alloy

Research of laser rapid forming Ti40 burn resistant titanium alloy

Three Dimensional Fem Simulation Of Titanium Hollow Blade Forming Process

Thermal Stress Field and Microstructure Evolution of Ti-6Al-4V Fabricated by Laser Engineered Net Shaping