Abstract:Active fillers such as carbon black and silica are added to rubber to improve its mechanical and viscoelastic properties. These fillers cause reinforcement in rubber compounds through physical and/or chemical interactions. Consequently, the compounds' rheological, mechanical, and viscoelastic behavior are affected. Changing the filler loading influences these properties due to the different interactions (filler-filler and filler-polymer) taking place in the compounds. In addition, rubbers with varying microstructures can interact differently with fillers, and the presence of polymer functionalization to enhance interactions with fillers can further add to the complexity of the network. In this work, the effects of different loadings (0–108 phr/0–25 vol. %) of a highly dispersible grade of silica with three types of solution styrene-butadiene rubbers (SSBR) and one butadiene rubber (BR) on their rheological, mechanical, and viscoelastic properties were investigated. It was observed that the Mooney viscosity and hardness of the compounds increased with an increasing filler loading due to the increasing stiffness of the compounds. Payne effect measurements on uncured compounds provided information about the breakdown of the filler-filler network and the extent of the percolation threshold (15–17.5 vol. %) in all the compounds. At high filler loadings, the properties for BR compounds worsened as compared to SSBR compounds due to weak polymer-filler interaction (strong filler-filler interaction and the lower compatibility of BR with silica). The quasi-static mechanical properties increased with the filler loading and then decreased, thus indicating an optimum filler loading. In strain sweeps on cured rubber compounds by dynamic shear measurements, it was observed that the type of rubber, the filler loading, and the temperature had significant influences on the number of glassy rubber bridges in the filler network and, thus, a consequential effect on the load-bearing capacity and energy dissipation of the rubber compounds.

Rheological Characterization of Room Temperature Vulcanized Silicone Sealant: Effect of Filler Particle Size

Influence of Incorporating CaCO3 into Room Temperature Vulcanized Silicone Sealant on Its Mechanical and Dynamic Rheological Properties

Assessment of Properties of A Room Temperature Vulcanized Silicone Sealant Based on Dynamic Rheological Approach

Linear Rheology of Natural Rubber Compounds Filled with Silica, Short Nylon Fiber or Both

Linear/Nonlinear Rheological Properties and Percolation Threshold of Polydimethylsiloxane Filled with Calcium Carbonate

Influence of Surface Property of CaCO3 Fillers on Apparent Viscosity of Filled Polydimethylsiloxane

Rheology of Fumed Silica/Polydimethylsiloxane Suspensions

Effect of fillers on the properties of two-component RTV silicone rubber.

Rheological Behavior of Carbon Black Filled Polystyrene Melts

Effects of Various Filler Surfaces on Tuning the Hierarchical Structures and Reinforcement of Silicone Rubbers

Effect of silica particle size and filler content on the fracture properties of epoxy resin composite

Investigation of Rheological, Mechanical, and Viscoelastic Properties of Silica-Filled SSBR and BR Model Compounds

Effect of Filler Network on Dynamic Viscoelastic Properties of Uncured Polymethylvinylsiloxanes Filled with Silica and Carbon Black

Effect of filler on the compression set, compression stress-strain behavior, and mechanical properties of polysulfide sealants

Studies on the Steady and Dynamic Rheological Properties of Poly(dimethyl‐siloxane) Filled with Calcium Carbonate Based on Superposition of Its Relative Functions

Effects of Vinyl Functionalized Silica Particles on Thermal and Mechanical Properties of Liquid Silicone Rubber Nanocomposites

The effects of filling method on silicone rubber composites filled with SiO2 and TiO2

Linear and nonlinear rheological behaviors of silica filled nitrile butadiene rubber

Preparation of Additional Room Temperature Vulcanizing Silicone Rubber: I. Influence Principle of Crosslinker and Filler

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Effect of filler surface-treatment on dynamic viscoelastic properties for PMVS/SiO2 composites