Abstract:The human hand plays a role in a variety of daily activities. This intricate instrument is vulnerable to trauma or neuromuscular disorders. Wearable robotic exoskeletons are an advanced technology with the potential to remarkably promote the recovery of hand function. However, the still face persistent challenges in mechanical and functional integration, with real-time control of the multiactuators in accordance with the motion intentions of the user being a particular sticking point. In this study, we demonstrated a newly-designed wearable robotic hand exoskeleton with multijoints, more degrees of freedom (DOFs), and a larger range of motion (ROM). The exoskeleton hand comprises six linear actuators (two for the thumb and the other four for the fingers) and can realize both independent movements of each digit and coordinative movement involving multiple fingers for grasp and pinch. The kinematic parameters of the hand exoskeleton were analyzed by a motion capture system. The exoskeleton showed higher ROM of the proximal interphalangeal and distal interphalangeal joints compared with the other exoskeletons. Five classifiers including support vector machine (SVM), K-near neighbor (KNN), decision tree (DT), multilayer perceptron (MLP), and multichannel convolutional neural networks (multichannel CNN) were compared for the offline classification. The SVM and KNN had a higher accuracy than the others, reaching up to 99%. For the online classification, three out of the five subjects showed an accuracy of about 80%, and one subject showed an accuracy over 90%. These results suggest that the new wearable exoskeleton could facilitate hand rehabilitation for a larger ROM and higher dexterity and could be controlled according to the motion intention of the subjects.

Research on Exoskeleton Multi-Finger Measurement Robot

Enable Intuitive and Immersive Teleoperation: Design, Modeling and Control of a Novel Wearable Exoskeleton

A Sensor Glove Based on Inertial Measurement Unit for Robot Teleoperetion.

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Development and evaluation of a hand exoskeleton for finger rehabilitation*

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

A Grasp Strategy with Flexible Contacting for Multi-fingered Hand Rehabilitation Exoskeleton

The Joint-Space Reconstruction of Human Fingers by Using a Highly Under-Actuated Exoskeleton

Finger-Individuating Exoskeleton System with Non-Contact Leader-Follower Control Strategy

Design and Verification of Piano Playing Assisted Hand Exoskeleton Robot

Research on Mechanical Design of a Multi-Function Finger Rehabilitation Robot

Evaluation of a 1-DOF Hand Exoskeleton for Neuromuscular Rehabilitation

Design and Control of a Reconfigurable Upper Limb Rehabilitation Exoskeleton With Soft Modular Joints

A Lightweight Exoskeleton Force Feedback Glove

A Wearable Upper Limb Exoskeleton for Intuitive Teleoperation of Anthropomorphic Manipulators

Human-robot Cooperative Control Based on Semg for the Upper Limb Exoskeleton Robot

Study on Multi-finger Under-actuated Mechanism for Robotic Hand

Multicontact Intrinsic Force Sensing Method of a Flexible Finger for Hand Assistance

A simplified model of a multi-jointed mechanical finger calibrated with experimental data by vision system

A multi-jointed underactuated robot hand with fluid-driven stretchable tubes