Abstract:A Si(220) double-crystal monochromator for the energy range 10–30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5°. The average exit beam movement of the monochromator for a 1-keV scan is 20 μm. For 40% of the energy range (10–30 keV) the exit beam position remains within 10 μm. For the second crystal no translation stage is used. When using a translation stage it is difficult to keep the change in flux within acceptable limits, because an alignment error of 0.01 arcsec at 30 keV will result in a change in intensity of 1%.

Application of Toroidally Curved Crystal to Monochromatic X-ray Backlighting Imaging

Diffraction imaging for in-situ characterization of double-crystal x-ray monochromators

High-resolution, highly monochromatic, time-framed, x-ray-backlit-imaging diagnostics with dual-channel toroidal crystals

Hard X-Ray Transmission Curved Crystal Spectrometers (10–100 Kev) for Laser Fusion Experiments at the ShenGuang-III Laser Facility

Transmission Crystal Spectrometer and Related Theoretical Calculation

Measurement of the Reflection Curve of Crystals Used in the Monochromator of X-ray Diffraction Beamline at NSRL

Utilization of Convex Crystal Spectrograph to Obtain Monochromatic X-Ray Images of Z-Pinch Plasmas

Theoretical considerations on the design of three-beam X-ray monochromators for synchrotron radiation

Double-spherically Bent Crystal High-Resolution X-ray Spectroscopy of Spatially Extended Sources

Focusing X-Rays with Curved Multiplate Crystal Cavity

Dynamical Diffraction Effect in a Curved Multi-Plate Crystal Cavity.

The Clinical Significance of Posterior Insular Volume in Adolescent Anorexia Nervosa

Crystal Cavity Resonance for Hard X Rays: A Diffraction Experiment

Forward Diffracted Parametric X Radiation From a Thick Tungsten Single Crystal at 855 MeV Electron Energy

A dynamic focusing x‐ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory (abstract)

Vacuum Formed Temporary Spherical and Toroidal Bent Crystal Analyzers for High Resolution X-ray Spectroscopy

Variable-sagittal-radii elliptical x-ray crystal spectrometers for high-neutron-yield plasma diagnostics

X-ray Polarized Source Based on Bragg Diffraction

Focusing and Energy Dispersion Properties of a Cylindrically Bent Asymmetric Laue Crystal

Diamond Channel-Cut Crystals for High-Heat-Load, Beam-Multiplexing, Narrow-Band X-ray Monochromators

X-Ray Resonance In Crystal Cavities: Realization Of Fabry-Perot Resonator For Hard X Rays