Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

The thermal expansion behavior of 3D C/C composites

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

Theoretical Analysis of Thermophysical Properties of 3D Carbon/Epoxy Braided Composites with Varying Temperature

Experimental study of thermal expansion behavior on braided structure composite

EFFECTS OF HEAT TREATMENT ON THERMAL EXPANSION OF 3D C/SiC COMPOSITES

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature

Investigation into the influence of CNTs configuration on the thermal expansion coefficient of CNT/Al composites

Interface and Thermal Expansion of Carbon Fiber Reinforced Aluminum Matrix Composites

Thermal Expansion Behaviors of Aluminum Composite Reinforced with Carbon Nanotubes

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

EFFECTS OF FABRIC ARCHITECTURES ON THE THERMAL EXPANSION COEFFICIENT AND THE THERMAL DIFFUSIVITY OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

Effects of interphases on thermal expansion of 3D-C/SIC composites

Thermal Expansion Properties of(Gr_f+SiC_p)/Mg Composites

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

The effect of carbon fiber length on the thermal expansion of fiber‐reinforced particulate hybrid composites

Densification Behavior and Performances of C/C Composites Derived from Various Carbon Matrix Precursors