Abstract:<p class="a-plus-plus">In this paper, the structural performance of the prestressed concrete T-girder bridge with a newly proposed diaphragm transverse connections (DTCs) have been investigated. The DTCs are composed of diagonal braces and horizontal brace, and the braces are structural steel with square cross section. A series of simulations have been carried out to study the effectiveness of the proposed DTCs on enhancing the transverse connection of the prestressed concrete T-girder bridge. Load Model 1 in accordance with Eurocode 1 is considered in the simulations, which consists of tandem system and uniformly distributed loads (UDL system). The Von Mises stress of the DTCs has been checked and corresponding steel grade has been given. The force on the surface between the T-girder bridge and the proposed DTCs has been studied and detailed connection design has been given for both new bridge construction and existing bridge retrofitting. The simulation results show that the maximum deflection arises when the deck is fully loaded with the UDL system and with lane 1 centrally located on exterior girder, and the tandem systems are applied at midspan simultaneously. It is revealed that with the proposed DTCs installed at midspan, the maximum deflection of the prestressed concrete T-girder bridge reduces 12.8% in the most unfavorable load case. In all the discussed load cases, the Von Mises stress of the proposed DTCs is within the reasonable range and can be borne by normal steel material. Additionally, connection methods have been given for the DTCs' application to new bridge and existing bridge. For the use of chemical anchor in existing bridge, the concrete and prestress tendons should be checked in case of any additional damage during the installing of the DTCs.</p>

Strut-and-tie models for end anchorage zones in prestressed concrete T-section girder bridges and reinforcement design

Calculation of prestress distribution for large-span cable-strut tensile structures

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Prestress design of spatial cable-truss tensile structures with annular plane

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Study on Static and Dynamic Behavior of T-Frame Bridge Reinforced by External Tendons

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Experimental study on failure mechanism of prestressed concrete T girder

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Simulating analysis of cantilever casting of prestressed concrete bridge

Design of Anchorage Zones of Pretensioned Concrete Girders: A Comparison of Nonlinear 3D FEM Results with Measurements on a Full Scale Beam

Simulation and Design Considerations on Transverse Connection of Prestressed Concrete T-girder Bridge

Stiffness Degradation Characteristics Destructive Testing and Finite-Element Analysis of Prestressed Concrete T-Beam

Structural Analyses of Extruded CFRP Tendon-Anchor System and Applications in Thin-Walled Aluminum/cfrp Bridge