Abstract:This study examined the effect of silica fume contents on the rheological behavior of slag-fly ash-silica fume-based geopolymer pastes by packing density measurement, low-field NMR, zeta potential , dynamic light scattering and FTIR analyses. Incorporating silica fume into sodium hydroxide (SH)-activated geopolymer pastes resulted in the decrease of packing density and the increases of yield stress, plastic viscosity and hysteresis loop curve area. The contrary results were found in the pastes activated by sodium silicate (SS). The water states of geopolymer pastes were influenced by SiO 2 /Na 2 O ratio of activator and silica fume dosage. The mobile water content in the sample increased as the silica fume dosage increased, regardless of the SiO 2 /Na 2 O ratio of activator. The particle size of the silica species in the activator and interstitial fluids is close to that of silica fume. The incorporation of silica fume resulted in the variation in the silicate structural characteristics of the interstitial fluids. The influence of silica fume on the rheological behaviors of geopolymer systems is strongly governed by the interparticle repulsion or attractiveness and activator nature, opposed to the filler effect and dissolution of silica fume. In SS-activated systems, the repulsion between the silanol groups on the silica fume surface and silicate species adsorbed on the surface of precursors particles contributed to the particle separations, thereby enhancing rheological behaviors. In SH-activated system, the attractiveness between divalent metal cations and silanol groups on the surfaces of precursor and silica fume particles was increased and the particle space was restrained. This study would provide new insights into the role of silica fume in the particle interaction of fresh ultra-high performance geopolymer concrete.

Effect of densified silica fume on low workability concrete strength development process

Comparative Study of Effect of Raw and Densified Silica Fume in the Paste, Mortar and Concrete

Rheological properties of mortar and concrete with low binder content

Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures

Effect of Silica Fume on the Rheological Properties of Cement Paste with Ultra-Low Water Binder Ratio

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Effect of coarse aggregate size distribution on concrete strength development process

Fractal Dimension of Concrete Incorporating Silica Fume and Its Correlations to Pore Structure, Strength and Permeability

Influence of silica fume on the workability and hydration process of ultra-high performance concrete

Early-Age Hydration Reaction and Strength Formation Mechanism of Solid Waste Silica Fume Modified Concrete

Dispersion behavior of silica fume in cementitious suspensions

Effect of silica fume on rheology of slag-fly ash-silica fume-based geopolymer pastes with different activators

Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures

Effect of Silica Fume in Concrete on Mechanical Properties and Dynamic Behaviors under Impact Loading

Rheological Properties of Composite Binder Paste Containing Different Types of Silica Fume

THE EFFECTS OF HIGH TEMPERATURE CURING ON HYDRATION REACTION AND STRENGTH DEVELOPMENT OF CEMENT PASTE CONTAINING SILICA FUME AT LOW WATER BINDER RATIO

Influence of Ultra-Fine Slag and Silica Fume on Properties of High-Strength Concrete

Strength Characteristics and Microstructure of Cement Stabilized Soft Soil Admixed with Silica Fume

Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and Silica Fume

Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials

High-flowable and High-Performance Steel Fiber Reinforced Concrete Adapted by Fly Ash and Silica Fume