Abstract:The currently used low carbon operation in blast furnaces (BFs) leads to a thin coke layer and deterioration in gas and liquid permeability. Previous studies have reported that coke breeze, formed by the graphitization of coke, is one of the main influences on gas and liquid permeability in the high-temperature zone of a BF. To investigate the influence of the graphitization of BF coke on its metallurgical properties, the degree of coke graphitization under different heating temperatures from 1100 to 1500℃ was investigated. The dependence of the degree of graphitization on coke reactivity index (CRI) and coke strength after reaction (CSR) was also studied. The relationship between different degrees of graphitization in coke and alkali metals was clarified. Finally, the micro-morphology of coke was inspected and analyzed. Results show that with increasing temperature, the degree of coke graphitization intensifies. With every 100℃ rise in heating temperature, the degree of coke graphitization increases 1.8 times, the value of the spacing of layers (d002) decreases by 2%, and the values of the layers diameter of microcrystalline structure (La) and the stack height (Lc) are improved by 3% and 15%, respectively. In addition, it is observed that the surface stomata of the coke decreases particularly the large pores, the mosaic structure decreases, the isotropic structure increases, and the degree of structural ordering increases. When the degree of graphitization intensifies, the CRI of the coke gradually decreases, the CSR gradually increases, the degree of coke degradation weakens, the formed large pores reduced, and the trend for pore wall damage is reduced. Moreover, the alkali metal plays a catalytic role in improving the CRI and decreasing the CSR. It is considered that the graphitized coke resists the destruction of the alkali metal and thus decreases the degree of coke degradation.

Study on Washability of Microcrystal Graphite Using Float–sink Tests

Effective Flotation Separation of Chalcopyrite and Graphite Using Eco-Friendly Xanthan Gum As Depressant

A novel technique for microcrystalline graphite beneficiation based on alkali-acid leaching process

The effect of comminution on surface roughness and wettability of graphite particles and their relation with flotation

Purification mechanism of microcrystalline graphite and dissolution of non-carbon impurity during alkali autoclave-acid leaching

Beneficiation of Ultra-Large Flake Graphite and the Preparation of Flexible Graphite Sheets from It

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Natural Graphite Froth Flotation-An Overview

Study on Purification and Modification Processing Technology of Microcrystalline Graphite

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

Wettability of Natural Microcrystalline Graphite Filler with Pitch in Isotropic Graphite Preparation

Development of a chemical-free floatation technology for the purification of vein graphite and characterization of the products

Preparation of natural microcrystalline graphite with high sphericity and narrow size distribution

Study on the recovery of graphite from spent carbon cathode via ultrasound-assisted foam flotation

A Study of Mechanisms of Nanobubble-Enhanced Flotation of Graphite

A statistical analysis of pores and microcracks in nuclear graphite

A statistical analysis of pores and micro-cracks in nuclear graphite

Experimental Investigation on the Purification of Natural Flake Graphite with Auxiliary Alkali-Acid Method

The Study on the Purification of Waste Graphite Thermal Field Material of FZ-Si Crystal

Microstructure and Molten Salt Impregnation Characteristics of A Micro-Fine Grain Graphite for Use in Molten Salt Reactors

Study on the Mechanism of Nanobubble-Coated Flake Graphite Ore Flotation in Short Circuits