Abstract:The currently used low carbon operation in blast furnaces (BFs) leads to a thin coke layer and deterioration in gas and liquid permeability. Previous studies have reported that coke breeze, formed by the graphitization of coke, is one of the main influences on gas and liquid permeability in the high-temperature zone of a BF. To investigate the influence of the graphitization of BF coke on its metallurgical properties, the degree of coke graphitization under different heating temperatures from 1100 to 1500℃ was investigated. The dependence of the degree of graphitization on coke reactivity index (CRI) and coke strength after reaction (CSR) was also studied. The relationship between different degrees of graphitization in coke and alkali metals was clarified. Finally, the micro-morphology of coke was inspected and analyzed. Results show that with increasing temperature, the degree of coke graphitization intensifies. With every 100℃ rise in heating temperature, the degree of coke graphitization increases 1.8 times, the value of the spacing of layers (d002) decreases by 2%, and the values of the layers diameter of microcrystalline structure (La) and the stack height (Lc) are improved by 3% and 15%, respectively. In addition, it is observed that the surface stomata of the coke decreases particularly the large pores, the mosaic structure decreases, the isotropic structure increases, and the degree of structural ordering increases. When the degree of graphitization intensifies, the CRI of the coke gradually decreases, the CSR gradually increases, the degree of coke degradation weakens, the formed large pores reduced, and the trend for pore wall damage is reduced. Moreover, the alkali metal plays a catalytic role in improving the CRI and decreasing the CSR. It is considered that the graphitized coke resists the destruction of the alkali metal and thus decreases the degree of coke degradation.

Purification mechanism of microcrystalline graphite and dissolution of non-carbon impurity during alkali autoclave-acid leaching

A novel technique for microcrystalline graphite beneficiation based on alkali-acid leaching process

Experimental Investigation on the Purification of Natural Flake Graphite with Auxiliary Alkali-Acid Method

Effects of Purification on the Properties and Microstructures of Natural Flake and Artificial Graphite Powders

Thermal and gas purification of natural graphite for nuclear applications

Purification effect of the methods used for the preparation of the ultra-high purity graphite

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

Study on Purification and Modification Processing Technology of Microcrystalline Graphite

Migration behavior of impurities during the purification of waste graphite powders

The Study on the Purification of Waste Graphite Thermal Field Material of FZ-Si Crystal

Purification of Natural Amorphous Graphite Using an Oscillating Liquid-Liquid Continuous Extraction Apparatus

Highly efficient purification of natural coaly graphite via an electrochemical method

Purification and Carbonation for High Loss and Low-Grade Diatomite in Inner Mongolia

In-depth Purification of Spent Pot-Lining by Oxidation-Expansion Acid Leaching – A Comparative Study

Mechanisms of graphite crucible degradation in contact with Si–Al melts at high temperatures and vacuum conditions

Study on purification of flake graphite by heat activation and hydrofluoric acid

Catalytic graphitization of coke and electrochemical performances of coke-based graphite

Study on Washability of Microcrystal Graphite Using Float–sink Tests

Purification of Spherical Graphite as Anode for Li-Ion Battery: A Comparative Study on the Purifying Approaches

Leaching characteristics and solidification strategy of heavy metals in solid waste from natural graphite purification

Purification and Carbon-Film-Coating of Natural Graphite As Anode Materials for Li-Ion Batteries