Abstract:The urgent need to reduce the consumption of fossil fuels drives the demand for renewable energy and has been attracting the interest of the scientific community to develop materials with improved energy storage properties. We propose a sustainable route to produce nanoporous carbon materials with a high−surface area from commercial graphite using a dry ball−milling procedure through a systematic study of the effects of dry ball−milling conditions on the properties of the modified carbons. The microstructure and morphology of the dry ball−milled graphite/carbon composites are characterized by BET (Brunauer–Emmett–Teller) analysis, SEM (scanning electron microscopy), ATR−FTIR (attenuated total reflectance–Fourier transform infrared spectroscopy) and Raman spectroscopy. As both the electrode and electrolyte play a significant role in any electrochemical energy storage device, the gravimetric capacitance was measured for ball−milled material/glassy carbon (GC) composite electrodes in contact with a deep eutectic solvent (DES) containing choline chloride and ethylene glycol as hydrogen bond donor (HBD) in a 1:2 molar ratio. Electrochemical stability was tracked by measuring charge/discharge curves. Carbons with different specific surface areas were tested and the relationship between the calculated capacitance and the surface treatment method was established. A five−fold increase in gravimetric capacitance, 25.27 F·g−1 (G40) against 5.45 F·g−1, was found for commercial graphene in contact with DES. Optimal milling time to achieve a higher surface area was also established.

Preparation of natural microcrystalline graphite with high sphericity and narrow size distribution

The shape modification of nature graphite powder used in lithium ion batteries

Microstructure and thermal expansion behavior of natural microcrystalline graphite

A wet granulation method to prepare graphite particles with a high tap density for high volumetric energy density lithium-ion storage

Preparation and lithium storage of anthracite-based graphite anode materials

Investigations on the modified natural graphite as anode materials in lithium ion battery

Improving Natural Microcrystalline Graphite Performances by a Dual Modification Strategy toward Practical Application of Lithium Ion Batteries

Synthesis and Electrochemical Performance of Silicon/Carbon Composite Anodes Through Ball Milling and Spray Drying Pyrolysis Process

Microstructure Design of Graphite in Nanoscale

Microfluidic Shape Analysis of Non-spherical Graphite for Li-Ion Batteries via Viscoelastic Particle Focusing

Wettability of Natural Microcrystalline Graphite Filler with Pitch in Isotropic Graphite Preparation

Improvement of Natural Graphite As a Lithium-Ion Battery Anode Material, from Raw Flake to Carbon-Coated Sphereelectronic Supplementary Information (ESI) Available: Colour Versions of Figs. 6, 8 and 9. See Http://Www.rsc.org/suppdata/jm/b3/b316702j/

Uniformly dispersed nano-crystallite graphite in a silicon-oxygen-carbon matrix for high rate performance lithium-ion batteries

Silicon/carbon composites based on natural microcrystalline graphite as anode for lithium-ion batteries

Sustainable Preparation of Nanoporous Carbons via Dry Ball Milling: Electrochemical Studies Using Nanocarbon Composite Electrodes and a Deep Eutectic Solvent as Electrolyte

Sub-millisecond lithiothermal synthesis of graphitic meso–microporous carbon

Impact of Spheroidization of Natural Graphite on Fast-Charging Capability of Anodes for LIB

Study on Purification and Modification Processing Technology of Microcrystalline Graphite

Electrochemical performance of expanded graphite prepared from anthracite via a microwave method

Statistical approach for the preparation of silicon-graphite anodes: The role of oxygen content and crystallite size on electrochemical performance

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries