Abstract:Due to the fluctuation and non-uniform distribution of temperature within the core structure of high-temperature gas-cooled reactors (HTGRs), the thermal expansion behavior of graphite materials plays an important role in the design of graphite components, especially of large-scale components. In the present paper, in order to investigate the influence of stress levels on the coefficient of thermal expansion (CTE) of IG-110 graphite, the strain gauge method was used to measure the CTE on the cylindrical specimens under a series of loads applied using a universal tensile testing machine. In addition, a more precise measurement using a thermal dilatometer was employed to validate the tests using the strain gauge method. A good agreement has been obtained between the experimental results using these two methods. The results show that when the specimens were under compressive loads, the CTE along the loading direction of the specimens increased and that along the perpendicular direction decreased, with more changes in the former. The absolute changes of the CTE in the two directions increased with increasing applied load. When graphite specimens were subjected to a compressive load of 40MPa, the axial CTE of specimens sectioned along the radial direction of the graphite brick as it is installed in the core structure increased from 4.13×10−6 to 5.35×10−6K−1, while the axial CTE of specimens sectioned along the vertical direction increased from 3.97×10−6 to 5.58×10−6K−1. Moreover, the residual change of the CTE, which was caused by the permanent residual strain after unloading, was observed. The change of the CTE with stress levels should be considered in the stress analysis and life prediction of the nuclear graphite components.

Microstructure and thermal expansion behavior of natural microcrystalline graphite

Material properties and structure of natural graphite sheet

Advantages of Natural Microcrystalline Graphite Filler over Petroleum Coke in Isotropic Graphite Preparation

Wettability of Natural Microcrystalline Graphite Filler with Pitch in Isotropic Graphite Preparation

The Microstructure and Texture of Gilsocarbon Graphite

Preparation of natural microcrystalline graphite with high sphericity and narrow size distribution

Fabrication of Matrix Graphite with a High Degree of Graphitization for Spherical Fuel Elements by Using Natural Microcrystalline Graphite Fillers

Improving Natural Microcrystalline Graphite Performances by a Dual Modification Strategy toward Practical Application of Lithium Ion Batteries

Homogenous and Highly Isotropic Graphite Produced from Mesocarbon Microbeads

Investigations on the modified natural graphite as anode materials in lithium ion battery

Pulverization and Spheroidization of Natural Graphite Powder for the Matrix Graphite in High-Temperature Gas-Cooled Reactors

Microstructure and properties of graphite nanoflakes/Cu matrix composites fabricated by pressureless sintering and subsequent thermo-mechanical treatment

Thermal conductivity and mechanical properties of graphite/Mg composite with a super-nano CaCO3 interfacial layer

In-Situ Fabrication of Expanded Graphite-Carbon Nanotube Nanocomposite with Enhanced Thermal Conductivity

Microstructure Design of Graphite in Nanoscale

Expansion and creep deformation with microstructure evolution in graphite cathode under constant pressure

Study on the Comprehensive Properties and Microstructures of A3-3 Matrix Graphite Related to the High Temperature Purification Treatment

The relationship of structure and processing condition of isotopic graphite

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

Structure and Thermal Expansion of Cu-90 vol. % Graphite Composites

Mechanical Behavior and Thermal Shock Resistance of MgO-C Refractories: Influence of Graphite Content