Intraparticle Diffusion Mechanism and Kinetic Models of Adsorptive Flue Gas Desulphurization by ZL50 Activated Carbon

高继贤,王铁峰,舒庆,张念,王金福

DOI: https://doi.org/10.3969/j.issn.1003-9015.2010.03.007

2010-01-01

Abstract:In order to investigate the effect and rule of diffusion in the dynamic carbonaceous adsorption process of flue gas desulphurization, the SO2 dynamic adsorption process of artificial flue gas with different inlet SO2 volume fractions were modeled and analyzed by diffusion-controlled apparent adsorption kinetic models. The results show that, during the desulphurization and denitrification process, the values of effective diffusion coefficients of SO2 adsorbed by ZL50 activated carbon fall in the region of 10–16~10–13 m2·s–1, which indicates that these diffusions mainly belong to configuration diffusions. The results also show that the prediction ability and precision of those quoted intraparticle diffusion models increase with the increase of inlet SO2 volume fraction and the time evolution of adsorption; they are caused by the increase of the ratio of Knudsen diffusion part in the whole diffusion process and decrease of the ratio of configurational diffusion part. The above mentioned results indicate that the ratio of diffusion resistance in total diffusion-reaction resistances increases with the increase of inlet SO2 volume fraction and the time evolution of adsorption, which is caused by the decrease of active sites of ZL50 activated carbon and the phenomena of the increasing rate of diffusion resistance for overcoming the diffusion barriers in activated carbon particle pores faster than the increasing rate of the activation energy resistance for overcoming the activation barriers of the catalytic oxidative surface reaction at active sites of ZL50 activated carbon during SO2 chemisorption process. It may be concluded that the possible mechanism of the adsorption process discussed above is that, in the earlier adsorption stage, the rate-controlled step is surface reaction and in the final adsorption stage, the rate-controlled step transits to the combination of diffusion process and surface reaction