Abstract:The anaerobic digestion model No 1 (ADM1), with fixed fractions of the substrate components, is currently used to simulate methane production during the anaerobic digestion (AD) of waste activated sludge (WAS). However, the goodness-of-fit for the simulation is not ideal due to the different characteristics of WAS from different regions. In this study, a novel methodology based on a modern instrumental analysis and 16S rRNA gene sequence analysis for the fractionation of organic components and microbial degraders in the WAS is investigated to modify the fractions of the components in the ADM1. The combination of Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (NMR) analyses were used to achieve a rapid and accurate fractionation of the primary organic matters in the WAS that was verified using both the sequential extraction method and the excitation-emission matrix (EEM). The protein, carbohydrate, and lipid contents in the four different sludge samples measured using the above combined instrumental analyses were 25.0 - 50.0%, 2.0 - 10.0%, and 0.9 - 2.3%. The microbial diversity based on 16S rRNA gene sequence analysis was utilized to re-set the initial fractions of the microbial degraders in the ADM1. A batch experiment was utilized to further calibrate the kinetic parameters in the ADM1. Based on the above optimization of the stoichiometric and kinetic parameters, the ADM1 with full parameter modification for WAS (ADM1-FPM) simulated the methane production of the WAS very well with a Theil's inequality coefficient (TIC) of 0.049, which was increased by 89.8% than that of the default ADM1 fit. The proposed approach, with its rapid and reliable performance, demonstrated a strong application potential for the fractionation of organic solid waste and the modification of ADM1, which contributed to a better simulation of methane production during the AD of organic solid wastes.

Dynamic Modeling the Anaerobic Reactor Startup Process

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

Modeling the Performance of Anaerobic Digestion Reactor by the Anaerobic Digestion System Model (ADSM)

Dynamic study of water distillation detritiation process startup using rigorous and ANN models

Low strength wastewater anammox start-up by stepwise decrement in influent nitrogen: Biofilm formation mechanism and mathematical modelling.

The Performance of Anammox Reactor During Start-Up: Enzymes Tell the Story

Performance and Process Kinetics Characteristics of ANAMMOX Fixed-Bed Reactor

[Effect of Sequential Biocatalyst Addition on Anammox Process].

Seeding Sludge and Start-up Strategy for Anammox Bioreactor

Modeling the dynamic performance of full-scale anaerobic primary sludge digester using Anaerobic Digestion Model No. 1 (ADM1)

Anaerobic Co-Digestion of Municipal Biomass Wastes and Waste Activated Sludge: Dynamic Model and Material Balances

Development of long-term dynamic BioWin® model simulation for ANAMMOX UASB micro-granular process

A novel approach for the fractionation of organic components and microbial degraders in ADM1 and model validation based on the methanogenic potential

A modeling approach to describe ZVI-based anaerobic system.

Accelerated start-up, long-term performance and microbial community shifts within a novel upflow porous-plated anaerobic reactor treating nitrogen-rich wastewater via ANAMMOX process

Study on Start-Up and Running of ANAMMOX Reactor

Development of a kinetic model to evaluate thiosulfate-driven denitrification and anammox (TDDA) process

Biref Introduction to Anaerobic Digestion Model No.1(ADM1)

[Start-Up of a Thermophilic Anaerobic Sludge Digester].

Start-up and optimization of a one-stage partial nitrification-anammox (PN-A) process treating low ammonium concentration wastewater: experimental results and modeling investigation

A kinetic modeling for carbon metabolism in sequencing batch reactor under multiple aerobic/anoxic conditions