Performance and Process Kinetics Characteristics of ANAMMOX Fixed-Bed Reactor

金仁村,郑平,唐崇俭
DOI: https://doi.org/10.3321/j.issn:0438-1157.2008.10.015
2008-01-01
Abstract:The start-up and performance of a novel Anammox(anaerobic ammonium oxidation) baffled reactor were studied and the process kinetics of the reactor was analyzed.There were two start-up strategies for Anammox process.The first was with fixed hydraulic retention time(HRT)(24h) and gradual increase in the influent substrate concentration,while the second was a fixed influent substrate concentration and gradual reduce in the HRT.The results showed that the latter(low substrate concentration with high hydraulic loading) was more conducive to Anammox reactor start-up.When start-up of the Anammox process was fulfilled,the ratio of consumed ammonia nitrogen,consumed nitrite nitrogen and produced nitrate nitrogen was 1:(1.22 ± 0.18):(0.13 ± 0.06),which approached to the theoretical value.When the influent total nitrogen concentration was 434 mg.L-1 at the HRT of 3h which corresponded to a nitrogen loading rate of 3.45 kg.m-.3d-1,the maximum total substrate removal rate of 3.00 kg.m-.3d-1 was observed at the 153rd day.The kinetic behaviors of Anammox were simulated by the second-order kinetic model and the modified Stover-Kincannon model,and the model parameters were obtained.The simulation results showed that the prediction accuracy of second-order kinetic model was better than that of the modified Stover-Kincannon model.
What problem does this paper attempt to address?