Kinetics of nitrogen removal in high rate anammox upflow filter.

Ren-Cun Jin,Ping Zheng
DOI: https://doi.org/10.1016/j.jhazmat.2009.05.016
IF: 13.6
2009-01-01
Journal of Hazardous Materials
Abstract:The process kinetics for laboratory-scale anammox (anaerobic ammonium oxidation) upflow filter using synthetic wastewater as feed were investigated. The experimental unit consisted of a 2.0L reactor filled with three-dimensional plastic media. The filter was tested for different influent substrate concentrations and hydraulic retention time (HRT). The substrate loading removal rate was compared with prediction of Stover–Kincannon, second-order and the first-order substrate removal models. Upon approaching pseudo-steady-state condition, substrate ammonium or nitrite concentrations were increased from 280 to 462mg N/L, while HRT was stepwise decreased from 14.4 to 2h, with a concomitant increase in nitrogen loading rate (NLR) from 0.93 to 7.34g/L day. Based on calculations, Stover–Kincannon model and second-order “Grau” model were found to be the appropriate models to describe the upflow filter. According to Stover–Kincannon model, the maximum total substrate removal rate constant (Umax) and saturation value constant (KB) were suggested as 12.4 and 12.0g N/L day, respectively. As Stover–Kincannon model and second-order model gave high correlation coefficients (97.9% and 98.6%, respectively), these models may be used in predicting the behavior or design of the anammox filter.
What problem does this paper attempt to address?