Abstract:The electrochemical capacitance properties of composite films prepared from electrically conducting polypyrrole (PPy) and single wall carbon nanotubes (SWNTs) have been investigated for supercapacitor application. The composite films were electropolymerized from homogenous mixture of pyrrole (Py) and raw SWNTs, or suspension of Py and functionalized SWNTs. The SWNTs were functionalized and cut by suspending in concentrated H2SO4/HNO3 solution and sonicating in a water bath. The morphology of composite films was observed by field emission scanning electron microscope (SEM). The electrochemical capacitance properties of the composite films were measured by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques in 1M KCl aqueous solutions. Due to the mesoporous structure of carbon nanotubes (CNTs), the easily accessible electrode/electrolyte interface allowed very fast charging/discharging process. Moreover, owing to the high electrical conductivity of CNTs and the mesoporous structure, the composite films had very low resistance and almost ideal capacitance behavior even on deeply discharged states. On the contrary, the pure PPy films had much larger resistance and worse capacitance properties due to the low conductance and contracted volume on discharging (reduced) states. On the other hand, in PPy/functionalized CNTs composite films, the PPy was doped by immobile functionalized CNTs. On reduced state, the PPy chains become neutral and the negative charge on functionalized CNTs must be balanced by cations with smaller size. The balancing behavior of cations could diminish ion-transfer polarization further. Therefore, the specific capacitance of PPy/SWNTs and PPy/functionalized SWNTs composite films would reach 144Fg−1 and 200Fg−1 at scanning rate of 200mVs−1, respectively. All of the above implies that the PPy/SWNTs composite, especially PPy/functionalized SWNTs composite, was a kind of promising electrode material of supercapacitor.

Electrochemical supercapacitor electrode material based on poly(3,4-ethylenedioxythiophene)/polypyrrole composite

Capacitance Properties of Poly(3,4-Ethylenedioxythiophene)/polypyrrole Composites

PEDOT@4A‐Molecular Sieve Composite Electrode for Supercapacitor

Flexible Electrodes Based on Polypyrrole/manganese Dioxide/polypropylene Fibrous Membrane Composite for Supercapacitor

Fabrication of High-Performance Flexible Supercapacitor Electrodes with Poly(3,4-ethylenedioxythiophene) (PEDOT) Grown on Carbon-Deposited Polyurethane Sponge

Preparation of Aqueous Poly(3,4-Ethylenedioxythiophene Methanol)-Poly(styrene Sulfonate) Dispersion and Its Capacitance Performance As Symmetric Supercapacitors

High-performance supercapacitors utilising PEDOT composite electrodes; synthesis, characterisation and electrochemical performance analysis

PEDOT-based composites as electrode materials for supercapacitors

Electrochemical Synthesis and Capacitance Properties of a Novel Poly(3,4-Ethylenedioxythiophene Bis-Substituted Bithiophene) Electrode Material

The Fabrication of Multilayers of Conducting Polymers and Its High Capacitance Performance Electrode for Supercapacitor

High Performance Supercapacitor Electrode Materials Based on Activated Carbon and Conducting Polypyrrole

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

A Universal Electrolyte Formulation For The Electrodeposition Of Pristine Carbon And Polypyrrole Composites For Supercapacitors

Capacitive Performance of Electrodeposited PEDOS and a Comparative Study with PEDOT

Electrochemical Capacitance of the Composite of Poly (3,4-Ethylenedioxythiophene) and Functionalized Single-Walled Carbon Nanotubes

Pedot: Pss/Pedot Composite Film for High Performance Electrochemical Electrode

Nano-composite of polypyrrole/modified mesoporous carbon for electrochemical capacitor application

Capacitance Properties of Single Wall Carbon Nanotube/polypyrrole Composite Films

Electropolymerized Polypyrrole Nanocomposites with Cobalt Oxide Coated on Carbon Paper for Electrochemical Energy Storage

The Preparation and Characteristic of Poly (3,4-Ethylenedioxythiophene)/reduced Graphene Oxide Nanocomposite and Its Application for Supercapacitor Electrode

Co-electrodeposited porous poplar flower-like poly(hydroxymethyl-3,4-ethylenedioxythiophene)/PEG/WS2 hybrid material for high-performance supercapacitor