Abstract:As a conductive polymer with great potential, poly(3,4-ethylenedioxythiophene) (PEDOT) has been developed as a high-rate supercapacitor electrode but stores less energy due to its limited theoretical capacity. In this work, the growth of PEDOT nanotube arrays on flexible Ti foil () is reported with significantly enhanced performance by incorporating highly pseudocapacitive polyaniline (PANi). The as-prepared nanotube arrays offer a three-dimensionally conductive network. Such arrays have been successfully connected with each other through the uniform coating of PANi onto the surface, thus contributing a substantial pseudocapacitance. By constructing the above novel structure, the hybrid electrode delivers a nearly 10 times enhancement of areal capacitance (2876 mF cm–2 at 5 mA cm–2) together with a remarkable rate performance (85% capacitance retention at 100 mA cm–2). Moreover, a flexible supercapacitor assembled with the electrode also exhibits a high-rate property with a relaxation time constant as small as 0.83 s (τ0 = 0.83 s) and a volumetric energy density of 15.9 mW h cm–3 under the power density of 178.9 mW cm–3. The cycling stability of such a device is also remarkable, indicating the great advantages of the electrode. More gratifying, such device can endure continuous bending at a maximum angle of 145° for 200 cycles. The present work can provide theoretical and technical support for the design and development of polymer-based flexible electrodes which possess both large areal capacitance and fast charging–discharging rates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09365?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09365</a>.SEM images of , high-resolution SEM image of , XRD patterns of PEDOT and PEDOT-PANi nanotubes, conductivity and areal capacitance of and , CV of Ti foil and , galvanostatic charge–discharge profiles of and at 50 and 100 mA cm–2, CV and galvanostatic charge–discharge of with different mass loadings of PANi, galvanostatic charge–discharge of solid-state supercapacitors, digital photos and CV curves of the capacitor during diverse bending states, and electrochemical performance comparison of the solid-state capacitor with previous results (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09365/suppl_file/sc0c09365_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Electrochemical Capacitance of the Composite of Poly (3,4-Ethylenedioxythiophene) and Functionalized Single-Walled Carbon Nanotubes

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Highly Stable Multi-Wall Carbon Nanotubes@poly(3,4-Ethylenedioxythiophene)/poly(styrene Sulfonate) Core–shell Composites with Three-Dimensional Porous Nano-Network for Electrochemical Capacitors

Enhanced electrochemical charge storage performance by doping of copper phthalocyanine-3,4′,4″,4‴-tetrasulfonic acid tetrasodium salt into polypyrrole/multi-walled carbon nanotubes 3D-nanostructured electrodes

Tin Disulphide/nitrogen-Doped Reduced Graphene Oxide/polyaniline Ternary Nanocomposites with Ultra-High Capacitance Properties for High Rate Performance Supercapacitor.

Pedot:Pss-Assisted Polyindole Hollow Nanospheres Modified Carbon Cloth As High Performance Electrochemical Capacitor Electrodes

Supercapacitor based on polymeric binary composite of polythiophene and single-walled carbon nanotubes

Electrosynthesis and electrochemical capacitive behavior of a new nitrogen PEDOT analogue-based polymer electrode

Vapor-Phase Polymerization of Fibrous Pedot on Carbon Fibers Film for Fast Pseudocapacitive Energy Storage

Electrochemical Synthesis and Capacitance Properties of a Novel Poly(3,4-Ethylenedioxythiophene Bis-Substituted Bithiophene) Electrode Material

Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Connecting PEDOT Nanotube Arrays by Polyaniline Coating toward a Flexible and High-Rate Supercapacitor

Poly(3,4-ethylenedioxythiophene)-multiwalled carbon nanotube composite films: structure-directed amplified electrochromic response and improved redox activity

A Ti3C2TX@PEDOT composite for electrode materials of supercapacitors

Optimization of a Conductive Polymer Layer on MOF-Derived Carbon Materials for High-Performance Supercapacitor Electrodes

Poly(1,5-diaminonaphthalene)-Grafted Monolithic 3D Hierarchical Carbon as Highly Capacitive and Stable Supercapacitor Electrodes

Carbon Nanotube/Polyaniline/Graphene Composite Paper and Its Electrochemical Capacitance Behaviors

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells

Capacitive Performance of Electrodeposited PEDOS and a Comparative Study with PEDOT

Fabrication of High-Performance Flexible Supercapacitor Electrodes with Poly(3,4-ethylenedioxythiophene) (PEDOT) Grown on Carbon-Deposited Polyurethane Sponge

Preparation of a Three-Dimensional Ordered Macroporous Carbon Nanotube/Polypyrrole Composite for Supercapacitors and Diffusion Modeling