Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Fabrication of Multilayers of Conducting Polymers and Its High Capacitance Performance Electrode for Supercapacitor

Flexible and Alternately Layered High‐Loading Film Electrode based on 3D Carbon Nanocoils and PEDOT:PSS for High‐Energy‐Density Supercapacitor

Facile Synthesis and Electrochemical Performances of Multi-Walled Carbon Nanotubes/poly(3,4-Ethylenedioxythiophene) Composite Films As Electrodes for Fabric Supercapacitors

Fabrication of High-Performance Flexible Supercapacitor Electrodes with Poly(3,4-ethylenedioxythiophene) (PEDOT) Grown on Carbon-Deposited Polyurethane Sponge

Effect of Multi-Walled Carbon Nanotubes and Conducting Polymer on Capacitance of Mesoporous Carbon Electrode

Electrochemical supercapacitor electrode material based on poly(3,4-ethylenedioxythiophene)/polypyrrole composite

Pedot:Pss-Assisted Polyindole Hollow Nanospheres Modified Carbon Cloth As High Performance Electrochemical Capacitor Electrodes

Pedot: Pss/Pedot Composite Film for High Performance Electrochemical Electrode

Interfacial Modification for Heightening the Interaction Between PEDOT and Substrate Towards Enhanced Flexible Solid Supercapacitor Performance

Electrostatic‐Assembled MXene@NiAl‐LDHs Electrodes with 3D Interconnected Networks Architectures for High‐Performance Pseudocapacitor Storage

Enhanced Electrochemical Performance of Pedot Film Incorporating Pedot: Pss

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Preparation and Characterization of Micro Polypyrrole Electrodes for Supercapacitor

Connecting PEDOT Nanotube Arrays by Polyaniline Coating toward a Flexible and High-Rate Supercapacitor

High-performance supercapacitors utilising PEDOT composite electrodes; synthesis, characterisation and electrochemical performance analysis

Preparation of Aqueous Poly(3,4-Ethylenedioxythiophene Methanol)-Poly(styrene Sulfonate) Dispersion and Its Capacitance Performance As Symmetric Supercapacitors

Fabrication of graphene/polyaniline nanofiber multilayer composite for supercapacitor electrodes via layer-by-layer vacuum filtration

Polymerization-Pyrolysis Assisted Construction of Multiscale Porous Carbon for High-Performance Supercapacitors

Integrated Flexible Supercapacitor Based on Poly (3, 4-Ethylene Dioxythiophene) Deposited on Au/porous Polypropylene Film/au

One-step Fabrication of Heterogeneous Conducting Polymers-Coated Graphene Oxide/carbon Nanotubes Composite Films for High-Performance Supercapacitors

3D Hierarchically Structured Tin Oxide and Iron Oxide-Embedded Carbon Nanofiber with Outermost Polypyrrole Layer for High-Performance Asymmetric Supercapacitor