Abstract:Single-use plastic foams are used extensively as interior packaging to insulate and protect items during shipment but have come under increasing scrutiny due to the volume sent to landfills and their negative impact on the environment. Insulative compression molded cellulose fiber foams could be a viable alternative, but they do not have the mechanical strength of plastic foams. To address this issue, a novel approach was used that combined the insulative properties of cellulose fiber foams, a binder (starch), and three different reinforcing paperboard elements (angular, cylindrical, and grid) to make low-density foam composites with excellent mechanical strength. Compression molded foams and composites had a consistent thickness and a smooth, flat finish. Respirometry tests showed the fiber foams mineralized in the range of 37 to 49% over a 46 d testing period. All of the samples had relatively low density (Dd) and thermal conductivity (TC). The Dd of samples ranged from 33.1 to 64.9 kg/m3, and TC ranged from 0.039 to 0.049 W/mk. The addition of starch to the fiber foam (FF+S) and composites not only increased Dd, drying time (Td), and TC by an average of 18%, 55%, and 5.5%, respectively, but also dramatically increased the mechanical strength. The FF+S foam and paperboard composites had 240% and 350% higher average flexural strength (σfM) and modulus (Ef), respectively, than the FF-S composites. The FF-S grid composite and all the FF+S foam and composite samples had equal or higher σfM than EPS foam. Additionally, FF+S foam and paperboard composites had 187% and 354% higher average compression strength (CS) and modulus (Ec), respectively, than the FF-S foam and composites. All the paperboard composites for both FF+S and FF-S samples had comparable or higher CS, but only the FF+S cylinder and grid samples had greater toughness (Ωc) than EPS foam. Fiber foams and foam composites are compatible with existing paper recycling streams and show promise as a biodegradable, insulative alternative to EPS foam internal packaging.

Mechanical Characterization of Short Fiber Reinforced Phenolic Foam

Mechanical Behavior of Hybrid Composite Phenolic Foam

Preparation of glass fiber reinforced phenolic injection molding materials and its properties

Enhanced peel resistance of fiber reinforced phenolic foams

Hybrid Composite Phenolic Foams

Mechanical Properties and Fracture Mechanisms of Low-Density Fiber Preforms Reinforced Phenolic Aerogel Composites

Comparison of Toughening Effects of Various Additives on Phenolic Foam

Mechanical properties of phenolic foam composite meta-aramid honeycomb under various directional loads and thermal environments

Flammability Properties and Mechanical Performance of Epoxy Modified Phenolic Foams

Properties of Rock Wool Fiber Modified Phenolic Foam Composite Materials

Characteristics of Carbon-Fiber-Reinforced Polymer Face Sheet and Glass-Fiber-Reinforced Rigid Polyurethane Foam Sandwich Structures under Flexural and Compression Tests

Design and Preparation of Shape Memory Phenol–formaldehyde Foam Composites with Excellent Thermal Stability and Mechanical Properties

Investigation on the Mechanical and Thermal Insulation Properties of Hollow Microspheres/Phenolic Syntactic Foams

Bending Properties of Steel Faced Sandwich Composite Panels with Phenolic Foam Cores

Fire Performance and Mechanical Properties of Phenolic Foams Modified by Phosphorus-Containing Polyethers

Enhanced mechanical properties, thermal stability of phenolic‐formaldehyde foam/silica nanocomposites via in situ polymerization

Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer

Direct Observation and Measurement of Fiber Architecture in Short Fiber-Polymer Composite Foam Through Micro-Ct Imaging

Effect of Starch and Paperboard Reinforcing Structures on Insulative Fiber Foam Composites

Properties of nano composite modified phenolic foam and its application in architectural design

Study on the Mechanical Properties of a Carbon-Fiber/Glass-Fiber Hybrid Foam Sandwich Structure