Abstract:In this work, a new class of fourth-generation, zero ozone depletion potential, hydrofluoroolefin-based blowing agents were used to prepare phenolic foam. While hydrofluoroolefin blowing agents have been used previously to prepare polyurethane foams, few studies have been reported on their use in phenolic foams. We introduce an effective method for foam preparation using two low-boiling blowing agents, cis-1,1,1,4,4,4-hexafluoro-2-butene and trans-1,1,1,4,4,4-hexafluoro-2-butene, and their combinations with hexane. Traditionally, phenolic foams have been prepared using chlorofluorocarbons and hydrochlorofluorocarbons, which can have harmful effects on the environment due to their high ozone depletion potential or global warming potential. Conductor-like screening model for real solvents (COSMO-RS) modeling studies were performed to understand the effects of different blowing agent combinations on their boiling points. A series of phenolic foams were prepared by varying the concentration of the hydrofluoroolefin and the hydrofluoroolefin–hexane blowing agent combinations. The concentrations of the surfactant, Agnique CSO 30, and the toughening agent, polyethylene glycol, were also varied to yield a formulation with the optimal properties. The foams formulated with the hydrofluoroolefin–hexane mixture displayed a higher compressive strength and a lower thermal conductivity than those prepared with either hydrofluoroolefin or hexane alone. The cell microstructure of all the foams was examined using scanning electron microscopy. By introducing flexible chains into the resin matrix, PEG facilitates proper distribution of hydrofluoroolefin–hexane blowing agents and other reagents and thereby increases the mechanical strength of the foam.

Comparison of Toughening Effects of Various Additives on Phenolic Foam

Fire Performance and Mechanical Properties of Phenolic Foams Modified by Phosphorus-Containing Polyethers

Mechanical Characterization of Short Fiber Reinforced Phenolic Foam

Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer

Comparative evaluation of flame retardant performance in rigid polyurethane foams: TCPP, TDCP MP, and ATH as promising additives

Phenolic Foam Preparation Using Hydrofluoroolefin Blowing Agents and the Toughening Effect of Polyethylene Glycol

A Novel Polyurethane Prepolymer As Toughening Agent: Preparation, Characterization, and Its Influence on Mechanical and Flame Retardant Properties of Phenolic Foam

Mechanical Behavior of Hybrid Composite Phenolic Foam

Flammability Properties and Mechanical Performance of Epoxy Modified Phenolic Foams

Investigation on the Mechanical and Thermal Insulation Properties of Hollow Microspheres/Phenolic Syntactic Foams

Effect of Multi-walled Carbon Nanotubes on Mechanical, Thermal and Electrical Properties of Phenolic foam via In-situ Polymerization

Hybrid Composite Phenolic Foams

Design and Preparation of Shape Memory Phenol–formaldehyde Foam Composites with Excellent Thermal Stability and Mechanical Properties

Bio-Based Trivalent Phytate: A Novel Strategy for Enhancing Fire Performance of Rigid Polyurethane Foam Composites

Effects of Inorganic Fillers on the Flame‐retardant and Mechanical Properties of Rigid Polyurethane Foams

Enhanced mechanical properties, thermal stability of phenolic‐formaldehyde foam/silica nanocomposites via in situ polymerization

Effect Of Nano-Titanium Nitride On Thermal Insulating And Flame-Retardant Performances Of Phenolic Foam

Synthesis of a novel triazine-based intumescent flame retardant and its effects on the fire performance of expanded polystyrene foams

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

Enhanced peel resistance of fiber reinforced phenolic foams

Optimisation of Additives to Maximise Performance of Expandable Graphite-Based Intumescent-Flame-Retardant Polyurethane Composites