Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

Analysis of relative heat transfer coefficient of plate heat exchangers under variable flow conditions

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

A Correction Factor-Based General Thermal Resistance Formula for Heat Exchanger Design and Performance Analysis

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

Single-phase Heat Transfer Correlation Based on Minimum Variance

Numerical Estimation of Heat Transfer Characteristics for Two-Row Plate-Finned Tube Heat Exchangers with Experimental Data

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Regression algorithm based on minimum variance and its application in heat exchanger measurement

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Research of variable characteristics of heat exchange equipment

Novel study on inverse convection–conduction heat transfer for plate-finned tube heat exchanger

A Comprehensive Empirical Correlation for Finned Heat Exchangers with Parallel Plates Working in Oscillating Flow

Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers

Numerical Analysis Of Composite Fouling In Corrugated Plate Heat Exchanger

Analytical and Numerical Study on the Uniformity of Temperature Difference Field in Heat Exchangers

Theoretical and experimental study on a novel evaluation criteria of heat exchangers applied in aero engines

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Performance analysis of counter flow plate-fin heat exchangers considering the effect of longitudinal conduction