Abstract:The multipacting phenomenon for the compact medical cyclotrons is special, due to the present of the fringing magnet filed inside the accelerating structure. And it will become more interesting, when the vacuum system is equipped with diffusion pump. A method used for CYCIAE-14 cyclotron cavity conditioning was reported in this paper, together with the testing results of an automatic conditioning circuits designed on such basis. Apart from traditional Low Level RF control, in which close-loop regulation is played as an important role, the automatic conditioning system emphasis on the cavity startup process. It takes advantage of the modern digital signal processing technique, combined with the direct digital synthesizer to accurately limit the reflection, will condition the cavity by means of the sweeping frequency, using the low RF driven power, in continuous wave mode. After successful establishment of the accelerating voltage, the system would maintain turning of the resonator and would decrease driven power once in a while, until the driven power is below a preset limit or the Dee voltage collapse again. In the latter case, the system will repeat the whole process until reaches the first one or interrupt by the operator. The electronics are designed and tested first; it will be used later in the commissioning of the RF system of other compact medical cyclotrons built by BRIF division of CIAE.

Theoretical and Practical Study on RF Model Cavity of 100mev H-Cyclotron

Preliminary Design of a Rf System for the 100 Mev Cyclotron

Design and primary test of full scale cavity of cyciae-100

Magnet Design and Engineering Technique Study on a 100mev Compact H-Cyclotron

THE STUDY AND DESIGN OF SPIRAL INFLECTOR AND CENTRAL REGION FOR CYCIAE-100 CYCLOTRON

Numerical Experiment of RF Performance for 70 MHz Cyclotron Cavity

The alternative of RF system design for the 100 MeV cyclotron at CIAE

Magnet Design and Construction Preparation for CYCIAE-100 at CIAE

Ion Source and Low Energy Injection Line for a Central Region Model Cyclotron.

Physics design of a 70MeV high intensity cyclotron, CYCIAE-70

RF Control Hardware Design for CYCIAE-100 Cyclotron

The Design of Magnetic Field Measurements System for CYCIAE-100

The design and testing of an automatic rf conditioning system for the compact medical cyclotron

The simulation of stripping extraction process for cyciae-100 *

100 MeV H- CYCLOTRON AS AN RIB DRIVING ACCELERATOR

Technical Study For Inflector And Central Region Of High Intensity Central Region Model Cyclotron

THE STUDY ON RF CAVITY TOLERANCE FOR CYCIAE-100

Isochronous Magnetic Field Shimming Method for Compact Cyclotrons

Investigation and quantitative simulation of beam physics for 230 MeV SC cyclotron under construction at CIAE

THE STUDY ON RF CAVITY TOLERANCE FOR CYCIAE-100*

Comprehensive test stand for high-intensity cyclotron development