Abstract:Water flux distributions vary with nozzle arrangement parameters. A prediction model for water flux distributions under multinozzle arrangements is developed, with a prediction error of less than 0.24%. A new design and optimization strategy/method for flat nozzle arrangement is proposed. Results show that the nonuniformity of water flux distributions in targeted cooling zones is significantly improved. Flat nozzles are widely used in the continuous casting process due to their stable spraying effect, wide spraying area, and strong applicability. The type and arrangement of nozzles have a direct effect on cooling efficiency and blank quality. Herein, the spray characteristics of flat nozzles in slab continuous casting are investigated with a detecting apparatus developed by University of Science and Technology Beijing and Jiangsu Boji Company (named USTB‐BOJI DA), and a prediction model for water flux distribution under different flat nozzle arrangements is established. The results show that the nozzles in a foot roller zone have good spray performance and water flow distribution, while the nozzles in bending zones are poor. Comparing the predicted and measured results of water flux distributions, the average error is less than 0.24%, indicating that the predictive model is reliable. In addition, the evaluation index is defined for water flux distribution under multinozzle arrangement, and the solution equations are given by applying the predictive model. Combining the above research, a new design and optimization strategy/method for flat nozzle arrangements is proposed, which can significantly improve the uniformity of the water flux distribution of the spray in the secondary cooling zones during continuous casting.

The Hot State Test Study on Nozzle's Character in Secondary Water Cooling Zone of Slab Continuous Casting in Pan Steel

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Analysis and Control of the Slab Hot Ductility Behaviors Based on Nozzle Arrangement during Continuous Casting

Development of system for spraying characteristic test of secondary cooling nozzle in continuous casting

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Study on Ultra Fast Cooling Technology in Hot Strip Mill

The Secondary Water Cooling Technology of High-efficiency Billet Continuous Casting

Research and Development of Secondary Cooling Heat Transfer Model for Baosteel 1930 Mm Slab Continuous Casting

Effect of Nozzle Parameters on the Temperature Field, Flow Field and Stress Field in the Continuous Casting of Steel Billet

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

New Model for Spraying Water of Nozzles in Secondary Cooling of Billet Continuous Casting

Optimization Control for Solidification Process of Secondary Cooling in Continuous Casting Steel

Numerical Simulation on Flow Field, Temperature Field and Inclusion Removal in the Mold for Slab Caster

Application of Process Simulation Software on Secondary Cooling Optimization for Continuous Caster

Secondary cooling technology for high-efficiency continuous billet-casting

Research and Development of Solidification and Heat Transfer Model for Continuous Casting of 1930mm Slab at Baosteel

Prediction and Optimization of Water Flux Distribution for Flat Nozzles in Slab Continuous Casting

Optimization of Secondary Cooling Water Distribution System for High-Strength,low-alloy Steel in Continuous Casting

Numerical Simulation and AnalysiS of Temperature Field and Stress Field for Nozzle in Coal-Water Slurry Gasifier

In-Situ Observation Combined with Numerical Simulation of the Solidification and Subsequent Cooling Process for Hot Stamping Steel

Analysis and Optimization of Spray Nozzles Arrangement in Slab Casting by Numerical Simulation