Abstract:Water flux distributions vary with nozzle arrangement parameters. A prediction model for water flux distributions under multinozzle arrangements is developed, with a prediction error of less than 0.24%. A new design and optimization strategy/method for flat nozzle arrangement is proposed. Results show that the nonuniformity of water flux distributions in targeted cooling zones is significantly improved. Flat nozzles are widely used in the continuous casting process due to their stable spraying effect, wide spraying area, and strong applicability. The type and arrangement of nozzles have a direct effect on cooling efficiency and blank quality. Herein, the spray characteristics of flat nozzles in slab continuous casting are investigated with a detecting apparatus developed by University of Science and Technology Beijing and Jiangsu Boji Company (named USTB‐BOJI DA), and a prediction model for water flux distribution under different flat nozzle arrangements is established. The results show that the nozzles in a foot roller zone have good spray performance and water flow distribution, while the nozzles in bending zones are poor. Comparing the predicted and measured results of water flux distributions, the average error is less than 0.24%, indicating that the predictive model is reliable. In addition, the evaluation index is defined for water flux distribution under multinozzle arrangement, and the solution equations are given by applying the predictive model. Combining the above research, a new design and optimization strategy/method for flat nozzle arrangements is proposed, which can significantly improve the uniformity of the water flux distribution of the spray in the secondary cooling zones during continuous casting.

New Model for Spraying Water of Nozzles in Secondary Cooling of Billet Continuous Casting

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Design and implementation of an automated secondary cooling system for the continuous casting of billets

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Application of Process Simulation Software on Secondary Cooling Optimization for Continuous Caster

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

Optimization for Secondary Cooling Parameters in Continuous Casting of High Carbon Chromium Bearing Steel

Study on Control Characteristics of Secondary Cooling System in Continuous Casting

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Simulation Using Realistic Spray Cooling for the Continuous Casting of Multi—component Steel

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

连铸板坯动态二冷控制系统开发与应用 Development and Application of Dynamic Secondary Cooling Control System on Continuous Casting Slab

Emulation of Dynamic Secondary Cooling and Soft Reduction in Continuous Slab Casting

Prediction and Optimization of Water Flux Distribution for Flat Nozzles in Slab Continuous Casting

Research on dynamic secondary cooling control model for slab continuous casting machine with high casting speed

Dynamic Secondary Cooling of Continiuous Slab Casting by Incremental PID Control

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

An Optimization Control Method for Heat Transfer Model during Slab Continuous Casting

Analysis and Optimization of Spray Nozzles Arrangement in Slab Casting by Numerical Simulation

Secondary Cooling Design for Slab Caster Based on Transient Heat Transfer Module