Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Analysis of Static and Dynamic Characteristic for Gantry Crane

Load Calculation with Feature-based of Gantry Crane

Static and Fatigue Analysis of Quayside Container Crane

Analysis on Bearing Capacity of Rigid Frame Column when Horizontal Knee-braces at Ends of Crane Beams

Calculation About the Load of Gantry Crane

Strength Check and Stress Test for Hoisting Mechanism of the 1300t Box-type Derrick Floating Crane

Finite Element Analysis in Dynamic Conditions of Bridge Crane Beam

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

Revisiting the Bearing Stresses in Webs of Crane Runway Girders under Wheel Loads

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

AN INSIGHT INTO FORMULAS FOR PREDICTING THE LOCAL BEARING STRESS IN WEBS OF CRANE RUNWAY BEAMS

The Finite Element Analysis for Tower Crane's Whole Structure

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Analysis of Modeling and Dynamic Response of Crane

Simulation and Analysis of Mechanical Property of Gantry of Electric Rope Shovel

Dynamic Modeling of a Gantry Crane System

Strength Analysis and Optimal Design for Main Girder of Double-Trolley Overhead Traveling Crane Using Finite Element Method

Finite Element Analysis of a Flexible Ferris Wheel

Finite element analysis of complete structure of tower cranes

Dynamic Characteristic Calculation and Experimental Research on Bridge Crane Model

Finite Element Analysis and Overturn Resistant Stability Calculation for Ultra-High Gantry Crane