Abstract:The biomass to plastic ratio in wood plastic composites (WPCs) greatly affects the physical and mechanical properties and price. Fast and accurate evaluation of the biomass to plastic ratio is important for the further development of WPCs. Quantitative analysis of the WPC main composition currently relies primarily on thermo-analytical methods. However, these methods have some inherent disadvantages, including time-consuming, high analytical errors and sophisticated, which severely limits the applications of these techniques. Therefore, in this study, Fourier Transform Infrared (FTIR) spectroscopy in combination with partial least square (PLS) has been used for rapid prediction of bamboo and polypropylene (PP) content in bamboo/PP composites. The bamboo powders were used as filler after being dried at 105 degrees C for 24 h. PP was used as matrix materials, and some chemical regents were used as additives. Then 42 WPC samples with different ratios of bamboo and PP were prepared by the methods of extrusion. FTIR spectral data of 42 WPC samples were collected by means of KBr pellets technique. The model for bamboo and PP content prediction was developed by PLS-2 and full cross validation. Results of internal cross validation showed that the first derivative spectra in the range of 1 800-800 cm(-1) corrected by standard normal variate (SNV) yielded the optimal model. For both bamboo and PP calibration, the coefficients of determination (R2) were 0.955. The standard errors of calibration (SEC) were 1.872 for bamboo content and 1.848 for PP content, respectively. For both bamboo and PP validation, the R2 values were 0.950. The standard errors of cross validation (SECV) were 1.927 for bamboo content and 1.950 for PP content, respectively. And the ratios of performance to deviation (RPD) were 4.45 for both biomass and PP examinations. The results of external validation showed that the relative prediction deviations for both biomass and PP contents were lower than ± 6%. FTIR combined with PLS can be used for rapid and accurate determination of bamboo and PP content in bamboo/PP composites.

[Quantitative Determination of PVC Concentration by Raman Spectrum].

Measurement of Polyethylene Density by Raman Spectrum

[Measurement of ethylene content in polypropylene by Raman spectrum].

Measurement of Properties of Polypropylene Copolymers by Raman Spectrum

Determination of Polyethylene Bulk Temperature by Raman Spectrum with Partial Least Square Method

A Method for the Quantitative Analysis of a Key Component in Complex Mixtures Using Raman Spectroscopy Based on Peak Decomposition

Detection of HDPE Properties by Raman Spectrum Based on Partial Least Square

Raman Imaging of Microplastics and Nanoplastics Generated by Cutting PVC Pipe.

Raman Spectral Decomposition Based On Multivariate Curve Resolution And Lorentz Function Constraint

A Detection Method for Impurity Content of PX Product Based on Raman Spectrum

Identification and Visualisation of Microplastics Via PCA to Decode Raman Spectrum Matrix Towards Imaging.

Component Analysis of the Circulating Fluid in an Adsorption Tower in a P-Xylene Unit Based on Raman Spectral Decomposition

Comparison of principal component regression (PCR) and partial least square regression (PLSR) modeling methods for quantifying polyethylene (PE) in recycled polypropylene (rPP) with near-infrared spectrometry (NIR)

Determination of Ultraviolet Stabilizers in Polyvinyl Chloride by Hplc with Resonance Raman Detection.

Quantification of Poly(vinyl chloride) Microplastics via Pressurized Liquid Extraction and Combustion Ion Chromatography

Ultrasonic concentration measurement of citrus pectin aqueous solutions using PC and PLS regression

Quantitative Raman analysis of microplastics in water using peak area ratios for concentration determination

[The Use of FTIR Coupled with Partial Least Square for Quantitative Analysis of the Main Composition of Bamboo/Polypropylene Composites]

Comparison of precision and accuracy in analyzing Cd in rice by LIBS combined with multivariate regression

Migration of plasticizers from flexible PVC: Monitoring the concentration profiles by confocal Raman microspectroscopy

Determining the Concentration of Polycyclic Aromatic Hydrocarbons in Water Using Surface Enhanced Raman Spectroscopy and Kernel Principal Components Analysis Combined with Support Vector Regression