Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Bending analysis on composite beam and combination beam of Chinese ancient wooden buildings

Experimental Study and Numerical Analysis of A Composite Bridge Structure

DISCUSSION ON SOME PROBLEMS OF BEAM-STRING STRUCTURES

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Experimental Study and Theoretical Analysis on Flexural Mechanical Propertiesof Reinforced Timber Beams

A Novel Rectangular-Section Combined Beam of Welded Thin-Walled H-Shape Steel/Camphor Pine Wood: The Bending Performance Study

Experimental Study on Composite Steel-concrete Beams with Box Sections Under Combined Bending and Torsion

Study on Mechanical Properties of Steel-Concrete Composite Beam with Corroded Studs Under the Effect of Negative Bending Moment

Test on Bending Resistance Properties of Bamboo-based Composite Ⅰ-shaped Beam

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Effects of dowels on the mechanical properties of wooden composite beams in ancient timber structures

Evaluation of Simplified Superposition Design Method for Composite Columns

Loading Capacity Analysis of Composite Box Beam's Special Shape Intersection in Positive Bending Region

Experimental and Analytical Study on the Mechanical Properties of U-shaped Steel-Encased Composite Beams

Test and Numerical Model of Curved Steel-Concrete Composite Box Beams under Positive Moments

Mechanical Behavior Analysis of High Strength Concrete Beams in Architectural Design: Simplified Calculation Method of Flexural and Shear Bearing Capacity

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Finite Beam Element for Curved Steel-Concrete Composite Box Beams Considering Time-Dependent Effect

Study on Flexural Behaviour of Box Section Bamboo-Steel Composite Beams

Experimental research on bending performance of wood-concrete composite slab with screw connections