Abstract:Abstract Recent years have witnessed that the prefabricated concrete structure is in the widespread use of building structures. This structure, however, still has some weaknesses, such as excessive weight of components, high requirements for construction equipment, difficult alignment of nodes, and poor installation accuracy. In order to handle the problems mentioned above, the prefabricated component made of lightweight concrete is adopted. At the same time, this prefabricated component is beneficial to reducing the load of the building structure itself and improving the safety and economy of the building structure. Nevertheless, it is rarely found that the researches and applications of lightweight concrete for stressed members are conducted. In this context, this paper replaces ordinary coarse aggregate with lightweight ceramsite or foam based on the C60 concrete mix ratio so as to obtain a mix ratio of C40 lightweight concrete that meets the engineering standards. Besides, ceramsite concrete beams and foamed concrete beams are fabricated. Moreover, through three-point bending tests, this paper further explores the mechanical properties of lightweight concrete beams and plain concrete beams during normal use conditions. As demonstrated in the results, the mechanical properties of the foamed concrete beam are similar to those of the plain concrete beam. Compared to plain concrete beams, the density of foamed concrete beams was lower by 23.4%; moreover, the ductility and toughness of foamed concrete were higher by 13% and 3%, respectively. However, in comparison with the plain concrete beam, the mechanical properties of the ceramsite concrete beam have some differences, with relatively large dispersion and obvious brittle failure characteristics. Moreover, in consideration of the nonlinear deformation characteristics of reinforced concrete beams, the theoretical calculation value of beam deflection was given in this paper based on the assumption of flat section and the principle of virtual work. The theoretically calculated deflection values of ordinary concrete beams and foamed concrete beams are in good agreement with the experimental values under normal use conditions, verifying the rationality and effectiveness of the calculation method. The research results of this paper can be taken as a reference for similar engineering designs.

Mechanical Behavior Analysis of High Strength Concrete Beams in Architectural Design: Simplified Calculation Method of Flexural and Shear Bearing Capacity

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

Seismic Behavior of High Strength Concrete Beams

Flexural-Shear Behavior of High-Strength Concrete Short Columns

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Research on and Model Analysis of Flexural Mechanical Properties of Basic Magnesium Sulfate Cement Concrete Beams

SHEAR CAPABILITY OF REINFORCED CONCRETE BEAMS WITHOUT STIRRUPS PREDICTED USING A FRACTURE MECHANICAL APPROACH

Experiment and Analysis of Mechanical Properties of Lightweight Concrete Prefabricated Building Structure Beams

Flexural Strengthening of Reinforced Concrete Beams Using Fabric Reinforced Alkali-Activated Slag Matrix

Experimental study on shear strength of lightweight high strength concrete beams

Practical Design Approach for Calculating Flexural Capacity of Steel Reinforced Ultra-high Toughness Cementitious Composite Bending Beams

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Flexural Behavior of Steel-Mpc Based High Performance Concrete Composite Beams Subjected to Hogging Moments

Nonlinear Finite Element Analysis of Deep Reinforced Concrete Coupling Beams

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Analysing Flexural Response in RC Beams: A Closed-Form Solution Designer Perspective from Detailed to Simplified Modelling

Column-to-Beam Flexural Strength Ratio for Rigorous Strong-Column–Weak-Beam Design for Steel–Concrete Composite Frames