Abstract:Demolished concrete, as one main form of construction and demolition wastes, has been widely studied of being utilized as recycled aggregates (RAs) in new concrete production. However, existing studies of applying RAs have been limited to the mechanical and durability issues of cementitious composites containing RAs. There has not been sufficient research of adopting RAs in cementitious products to also address the environmental sustainability. On the other hand, existing research utilizing cementitious products (e.g., concrete pavement) for air purification purpose have not adequately considered RA usage. Aiming to address the two sustainable objectives (i.e., waste diversion and air purification) simultaneously in concrete mix, this research adopted a two-step approach. Firstly, we studied and identified the optimal mix design of pervious concrete containing TiO2-soaked recycled coarse aggregates (RCAs) in order to achieve the higher compressive strength; secondly, we investigated the photocatalytic performance of pervious concrete containing RCAs coated with TiO2 photocatalysts. The photocatalytic performance of pervious concrete was also tested by applying a 10-min heavy rainwater wash. Experimental test results revealed that the internal voids of adhered mortar enabled RCAs to absorb more TiO2 particles. The NO degradation rate of TiO2-soaked RCAs increased from 71.4% to 80.6% when RCAs' size decreased from 15-20 mm to 5-10 mm. The orthogonal experimental investigation indicated that water-to-binder ratio had the most significant effect on concrete compressive strength, followed by ratio of RCAs to binder, and replacement ratio of RCAs to natural aggregates. The optimized mix design for pervious concrete containing RCAs was identified to achieve highest strength (i.e., water-to-binder ratio at 0.35, coarse aggregate-to-binder ratio of 3 by mass, fly ash replacement rate to Portland cement at 5%, and 50% replacement ratio of RCAs to NCAs). The concentration of TiO2 solution at 0.3% was identified as the optimal ratio to achieve the highest NO degradation rate at 70% before rainwater wash. The NO degradation rates of pervious concrete still reached nearly 50% after 10-min heavy rainwater wash, indicating that pervious concrete using RCAs coated with TiO2 could largely maintain its photocatalytic capacity. This study addresses two main social and environmental issues in developing countries (e.g., China), namely overwhelming amount of construction & demolition wastes being generated, and air pollution. It leads to the cleaner production in concrete pavement construction by achieving the optimization between waste reuse, air purification, and engineering properties of porous concrete. (c) 2019 Elsevier Ltd. All rights reserved.

Enhancement mechanism for mechanical and water purification performance of piezo-photocatalytic recycled aggregate pervious concrete containing hydrophobic BiOI/BaTiO 3

Enhancement Strategies for Recycled Brick Aggregate Concrete Using MICP and EICP Treatments

Tri-phase interface to enhance the performance of piezoelectric photocatalysis and recyclability of hydrophobic BiOI/BaTiO 3 heterojunction

Studying the Mix Design and Investigating the Photocatalytic Performance of Pervious Concrete Containing TiO2-Soaked Recycled Aggregates

Studying properties of pervious concrete containing recycled aggregate loaded with TiO<sub>2</sub>/LDHs and its liquid pollutant purification

Research on the purification efficiency and mechanism for road runoff pollutants in pervious concrete with recycled aggregates

Studying properties of pervious concrete containing recycled aggregate loaded with TiO2/LDHs and its liquid pollutant purification

Constructing durable BiFeO3@SrBi2B2O7 p-n heterojunction for persulfate enhanced piezo-photocatalytic water purification

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Enhanced Photocatalytic Activity in Photocatalytic Concrete: Synthesis, Characterization, and Comprehensive Performance Assessment of Nano-TiO2-Modified Recycled Aggregates

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Efficient enhancement of piezo-catalytic activity of BaTiO 3 -based piezoelectric ceramics via phase boundary engineering

Compressive Strength, Permeability, and Abrasion Resistance of Pervious Concrete Incorporating Recycled Aggregate

Enhanced piezo-catalytic performance of BaTiO3 nanorods combining highly exposed active crystalline facets and superior deformation capability: Water purification and activation mechanism

Tuning piezoelectric driven photocatalysis by La-doped magnetic BiFeO3-based multiferroics for water purification

Study on Mechanical Properties and Microscopic Mechanism of PVA-Modified Recycled Brick Aggregate Concrete

Improving Performance of Recycled Aggregate Concrete with Superfine Pozzolanic Powders

Hydrogen Generation and Degradation of Organic Dyes by New Piezocatalytic 0.7BiFeO 3 –0.3BaTiO 3 Nanoparticles with Proper Band Alignment

An Approach to Effectively Improve the Properties of Recycled Concrete Aggregate and Recycled Brick Aggregate by Micro-Nano Particle Reconstruction

Significant Enhancement of Piezoelectric Photocatalytic Activity in Mn-doped BiFeO3

Piezo-enhanced Photocatalysis of MoS 2 /bi 4 O 5 Br 2 /PVDF-HFP Film for Wastewater Purification