Abstract:This special issue of the International Journal of Geomechanics contains 10 papers that cover numerical and experimental investigations on various aspects of sustainable civil infrastructures. The topics include the self-healing capability of asphalt, cracking and fracture of asphalt pavement and portland cement concrete, soilimprovement techniques (including compaction and vertical drains), and various foundation systems. There are two papers on asphalt. The self-healing of asphalt mixtures can extend the fatigue life of asphalt pavement. Huang et al. developed a method based on fuzzy evaluation and the analytic hierarchy process for evaluating the self-healing capability of asphalt mixtures. The feasibility and effectiveness of the method were validated by a case study. To understand the mechanisms of material failure is essential for the design and construction of sustainable civil infrastructures. Chen et al. proposed a multiscale numerical modeling approach to analyze the distress of asphalt pavement on steel bridge decks and applied the approach to a case study. Their results highlighted the importance of bridge structure and pavement evenness in the distribution of pavement cracks. One paper focuses on concrete fracture and damage. Xu et al. investigated the spallation failure of fiber-reinforced concrete slabs under impact loading. Their numerical simulations showed that fibers can remarkably improve the tensile strength of concrete slabs and effectively limit the initiation and propagation of cracks. Soil improvement is an important element of sustainable civil infrastructures. Three papers are related to soil-improvement techniques, including compaction and vertical drains. Nie et al. presented an integrated theoretical and case study on anomalous data detection for roller-integrated compactionmeasurement. Their results showed that the proposed bidimensional anomalous data-identification method rendered a more accurate correlation, whereas the proposed neighbor-weighted estimation method improved the precision of compaction evaluation. Two papers are related to vertical drains. Azari et al. applied an elastic–viscoplastic model to model soft soil improved with vertical drains and compared their simulation results with field measurements. Their results showed that the distribution of the overconsolidation ratios in the disturbed zone greatly influenced the viscoplastic strain rates, creep strain limits, and consolidation. Parsa-Pajouh et al. evaluated the efficiency of several proposed formulations for plane-strain modeling of vertical drain-assisted consolidation through an integrated numerical and experimental investigation. By comparing the predicted and measured pore pressures in well-controlled laboratory tests, the advantages and disadvantages of these formulations were discussed. The remaining four papers deal with foundation systems. A better understanding of soil–structure interaction can lead to optimized foundation design and construction, which increase the sustainability of many civil infrastructures. Zhou and Dai presented a new strut-and-tie model for the analysis of force distribution among piles, pile caps, and superstructure components, including struts and ties. Through two case studies, they demonstrated the effectiveness and accuracy of their model. Farouk and Farouk examined the effect of a superstructure’s rigidity on the contact stress and differential settlement for plane two-bay frames. They found that the rigidities of walls and slabs have significant effects on the resultant average contact stresses and the maximum settlements under the footings, which affect the differential settlements. They provided new charts and equations for calculating the average contact stress and maximum settlements under the inner and outer footings for plane two-bay frames. Zhang et al. developed a numerical model to investigate the working mechanism of pervious concrete piles. Their model was validated by a case study. Their results showed that pervious concrete piles can reduce foundation settlement caused by their high stiffness and permeability and, hence, are particularly suitable for reinforcing foundations with low bearing capacity and soils with poor permeability. Yang et al. conducted a numerical investigation on the load-displacement behavior of a reinforced strip footing using a double-yield model. The effects of various parameters, such as burial depth, reinforcement length, and arrangement of two reinforcement layers, were studied. Their results showed that the load-displacement behavior of strip footings simulated with the double-yield model is more realistic than that with the Mohr-Coulomb model, and the optimal burial depth and length of reinforcement obtained from their study agreed well with values reported by previous investigators.

Characterization, Applications and New Technologies of Civil Engineering Materials and Structures

Editorial: Mechanics of Intelligent Materials and Structures

State-of-the-art of smart structural systems in civil engineering

Special Issue on Recent Advances in Constitutive and Numerical Methods for Sustainable Civil Infrastructures

Analysis of New Materials Application in Municipal Road Construction

Sustainable Cementitious Materials for Civil and Transportation Engineering

Application and Research of Construction Mechanics and New Control Technology in Large and Complex Steel Structures Construction

Laboratory Test and Mechanism Analysis on the Reinforced Role of Civil Synthetic Material

Analysis and strengthening of superstructure diseases of concrete bridges in China

Editorial: Microstructures and Mechanical Properties of Cement-Based Composites

Survey and study on intelligent monitoring and health management for large civil structure

Advances in materials applied in civil engineering

High Strength/Performance Structural Materials And The Developments Of Modern Engineering Structures And The Design Theory

An Introduction to Civil Engineering Construction Technology in Civil Engineering Construction

Real-time Monitoring and Evaluation Algorithm of Civil Engineering Material Performance Based on Sensor

CONSTRUCTION MECHANICAL PROBLEMS AND COMPUTATIONAL METHODS OF COMPLEX STEEL STRUCTURES

Research on New Materials in Civil and Construction Engineering

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Review of advanced road materials, structures, equipment, and detection technologies

Research on Concrete Construction Technology and Innovation Management in Civil Construction

Research on the application of high performance concrete and steel structure combination in civil engineering