Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Low-Temperature Annealing Induced Amorphization in Nanocrystalline NiW Alloy Films

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

Amorphous complexions enable a new region of high temperature stability in nanocrystalline Ni-W

Annealed Crystallization of Ultrafine Amorphous NiB Alloy Studied by XAFS.

In-Situ XAFS Investigation of the Crystallization Mechanism of Ni-B Nano-Amorphous Alloy

Metallurgical Behavior of Amorphous Alloy during Annealing at Different Temperatures via Molecular Dynamics Simulation

Annealing Effects on the Microstructure and Photoluminescence Properties of Ni-Doped Zno Films

Structural Study of Ni-B Ultrafine Amorphous Alloy During Annealed Crystallization

Thermal evolution of nanocrystalline co-sputtered Ni-Zr alloy films: Structural, magnetic and MD simulation studies

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Evolution of local atomic structure accompanying devitrification of amorphous Ni-Zr alloy thin films

ANNEALED CRYSTALLIZATION OF ULTRAFINE Ni-P AND Ni-Ce-P AMORPHOUS ALLOYS STUDIED BY XAFS

Laser Annealing of Amorphous Ni-Ti Shape Memory Alloy Thin Films

In-situ XAFS study on structures and devitrifications of Ni–B nano-amorphous alloys

Structure-property relations characterizing the devitrification of Ni-Zr glassy alloy thin films

In-situ XAFS Study on the Crystallization Mechanism of NiB Nano-Amorphous Alloy

Annealing-induced abnormal hardening in nanocrystalline NbMoTaW high-entropy alloy thin films

The effect of deformation temperature on recrystallization in a Ni-based single crystal superalloys