Abstract:Micro and Nano-technologies need precision machines that can produce motion accuracy down to micro/nano-meter range. At the same time, these machines have to operate at high speeds to yield high productivity. Such an increasingly tight control performance requirement puts a significant challenge to control community and forces control engineers to look beyond traditional linear control theory for more advanced nonlinear controllers. This research is to present an advanced nonlinear adaptive robust control approach to achieve micro/nanometer level positioning accuracy for micro/nano-manipulation type applications. In addition, the proposed control strategy is implemented on a commercial linear motor drive system with a position measurement resolution of 20 nanometers by an external laser interferometer. Experimental results for both long-range high-speed/high-acceleration motions and short-range slow motions are presented to demonstrate the precision motion that can be achieved by the proposed method and various practical issues that remain to be solved. It is found that for motions with a maximum speed of 2 m/sec and maximum acceleration of 45 m/sec2, the steady state position tracking error is within the linear encoder resolution of 0.5 μm when the system comes to a stop and within 5 μm during the 2 m/sec constant speed period. Furthermore, the maximal position tracking during the entire motion is mostly within 20μm. For slow motions with a maximal speed of only 0.0002m/sec, the steady state position tracking error with the external laser interferometer position measurement is mostly within 0.1 μm when the system comes to a stop and within 0.2 μm during the constant low speed period, and the maximal position tracking during the entire motion is within 2μm.

Experimental Study of Laser Interferometry Based Motion Tracking of a Flexure-Based Mechanism

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Experimental Investigation of Robust Motion Tracking Control for a 2-DOF Flexure-Based Mechanism

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

A Novel Laser Tracking Testbed For Robot Trajectory Errors

Design, Identification and Control of a 2-Degree of Freedom Flexure-Based Mechanism for Micro/Nano Manipulation

Learning-Based Optimal Desired Compensation Adaptive Robust Control for a Flexure-Based Micro-Motion Manipulator

Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism

Experimental System Identification and Feed-Forward Control of a 2-DOF Flexure-Based Mechanism

Design and tracking control of a large-range reluctance-actuated compliant nano-manipulator

Development of an End-Effector Mounted Tracking Methodology for Feedback Control of High Precision 3-DOF Planar Motions

Precision Motion Control of Linear Motor Drive Systems for Micro/Nano-Positioning

Development of a Large-Range XY-Compliant Micropositioning Stage with Laser-Based Sensing and Active Disturbance Rejection Control

Stiffness estimation of the flexure-based five-bar micro-manipulator

Contour Accuracy Improvement of a Flexure-Based Micro-Motion Stage for Tracking Repetitive Trajectory

Design and Dynamics of A 3-Dof Flexure-Based Parallel Mechanism for Micro/Nano Manipulation

Modeling and Verification for a Three-Degree-of-Freedom Flexure-Based Planar Parallel Micro Manipulator

A disturbance observer-based adaptive control approach for flexure beam nano manipulators.

A Beam Flexure-Based Nanopositioning Stage Supporting Laser Direct-Write Nanofabrication

Trajectory Control a Flexible Space Manipulator Utilizing a Macro-Micro Architecture

Closed-Form Modeling and Analysis of an XY Flexure-Based Nano-Manipulator