Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

A RBFN Based Cogging Force Estimator of PMLSM with q<1 Structure.

Cogging force estimator based on BP neural network of PMLSM

Cogging force and its estimation using a neural network based on 2D field model of PMLSM

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Detent Force Fast Optimization Method of Modular Permanent-Magnet Linear Synchronous Motors

Permanent Magnet Linear Synchronous Motor Mover Position Estimation at Zero and Low Speed Using Eddy Current Loss Equivalent Resistance

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Online Parameter Identification for Surface-mounted Magnet Synchronous Motors Based on Adaptive RBF Neural Network

Cogging Force Identification Based on Self-Adaptive Hybrid Self-Learning TLBO Trained RBF Neural Network for Linear Motors

Minimization of Cogging Force in Fractional-Slot Permanent Magnet Linear Motors with Double-Layer Concentrated Windings

RBFNN Based Linear Motor Cogging Force Identification for Lithography Machines

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Full Parameter Estimation for Permanent Magnet Synchronous Motors.

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Force Ripple Minimization Design for Consequent Pole Permanent Magnet Linear Synchronous Motor

THRUST RIPPLE OPTIMIZATION AND EXPERIMENT FOR PMLSM

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Assessment of cogging-force-reduction techniques applied to fractional-slot linear permanent magnet motors equipped with non-overlapping windings

Fuzzy Radius Basis Function neural network based vector control of Permanent Magnet Synchronous Motor

Finite Element Analysis of Load Characterisitic and Parameters in Permanent Magnet Linear Synchronous Motor with Structure Slots Per Phase Per Pole Less Than 1