Abstract:In this article, a novel explicit approach for designing complex thin-walled structures based on the Moving Morphable Component (MMC) method is proposed, which provides a unified framework to systematically address various design issues, including topology optimization, reinforced-rib layout optimization, and sandwich structure design problems. The complexity of thin-walled structures mainly comes from flexible geometries and the variation of thickness. On the one hand, the geometric complexity of thin-walled structures leads to the difficulty in automatically describing material distribution (e.g., reinforced ribs). On the other hand, thin-walled structures with different thicknesses require various hypotheses (e.g., Kirchhoff-Love shell theory and Reissner-Mindlin shell theory) to ensure the precision of structural responses. Whereas for cases that do not fit the shell hypothesis, the precision loss of response solutions is nonnegligible in the optimization process since the accumulation of errors will cause entirely different designs. Hence, the current article proposes a novel embedded solid component to tackle these challenges. The geometric constraints that make the components fit to the curved thin-walled structure are whereby satisfied. Compared with traditional strategies, the proposed method is free from the limit of shell assumptions of structural analysis and can achieve optimized designs with clear load transmission paths at the cost of few design variables and degrees of freedom for finite element analysis (FEA). Finally, we apply the proposed method to several representative examples to demonstrate its effectiveness, efficiency, versatility, and potential to handle complex industrial structures.

The Model Design and Simulation of Automatic Placement Path for the Shell of Composite Materials

Manufacture and prefabrication practice on a test model of a novel six-bar tetrahedral cylindrical lattice shell

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Design and analysis of the mandrel structure for a composite S-shaped inlet

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Numerical and Experiment Studies of Different Path Planning Methods on Mechanical Properties of Composite Components

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells

Fracture Modeling of Curved Composite Shell Structures Using Augmented Finite Element Method

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Modeling, Evaluation and Optimization of Interlocking Shell Pieces

A Unified High-Order Semianalytical Model and Numerical Simulation for Bistable Polymer Composite Structures

Modeling of the tubular shell of laminated connector materials during impact loading

Topology optimization of multi-phase shell-infill composite structure for additive manufacturing

A Finite Element Model Using Multi-Layered Shell Element in Laser Forming

Non-geodesic winding design method for the composite shell of unequal-pole-hole solid rocket motor

Shell-infill composite structure design based on a hybrid explicit-implicit topology optimization method

Modeling and vibration analysis of bolted composite conical-conical shells with flanges

Optimization and assessment of CF/PEEK-PEEK composite shell manufactured by the laser-assisted in situ consolidation integrated with material extrusion process

Shell-infill composite structure design based on a hybrid explicit- implicit topology optimization method

Mixed-dimensional coupling modeling for laser forming process

A novel explicit design method for complex thin-walled structures based on embedded solid moving morphable components