Abstract:The maglev linear motor has three degrees of motion freedom, which are respectively realized by the thrust force in the x-axis, the levitation force in the z-axis and the torque around the y-axis. Both the thrust force and levitation force can be seen as the sum of the forces on the three windings. The resultant thrust force and resultant levitation force are independently controlled by d-axis current and q-axis current respectively. Thus, the commonly used dq transformation control strategy is suitable for realizing the control of the resultant force, either thrust force and levitation force. However, the forces on the three windings also generate additional torque because they do not pass the mover mass center. To realize the maglev system high-precision control, a maglev linear motor with a new structure is proposed in this paper to decrease this torque. First, the electromagnetic model of the motor can be deduced through the Lorenz force formula. Second, the analytic method and finite element method are used to explore the reason of this additional torque and what factors affect its change trend. Furthermore, a maglev linear motor with a new structure is proposed, with two sets of 90 degrees shifted winding designed on the mover. Under such a structure, the mover position dependent periodic part of the additional torque can be offset. Finally, the theoretical analysis is validated by the simulation result that the additionally generated rotating torque can be offset with little fluctuation in the proposed new-structure maglev linear motor. Moreover, the control system is built in MATLAB/Simulink, which shows that it has small thrust ripple and high-precision performance.

Analysis of Multiple Equilibrium Points and Research on the Stability of Fixed-current Control in Maglev System

Electromagnetic Analysis of Hybrid-Excitation Magnetic Levitation System for Low-speed Maglev Train

Real-Time Adaptive Control of a Magnetic Levitation System with a Large Range of Load Disturbance

Sliding mode control based on fuzzy approaching law of hybrid suspension system

Stability Analysis of Speed and Multi-Factor Simplification in Port Controlled Dissipative Hamiltonian Permanent Magnet Synchronous Motor

Current Control for the Single Degree of Freedom Linear Maglev System

H∞ controller for an active magnetic ball levitation system

Levitation Force Control of Maglev Permanent Synchronous Planar Motor Based on Multivariable Feedback Linearization Method

Research on Vibration Control Regarding Mechanical Coupling for Maglev Trains with Experimental Verification

Computation and Analysis of Propellant and Levitation Forces of a Maglev System Using FEM Coupled to External Circuit Model

Analyzing and Optimizing Design of Current-Loop in the Magnetic Levitation Controller on Maglev Vehicle

Analysis of Control Characteristics of Electromagnetic and Permanent Magnet Hybrid Suspension System

Analysis of magnetic field and levitation force of single magnet

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Research on Suspension and Guidance Technologies of EMS Maglev Trains Using V-shaped Guideway

Research on One-Dimensional Motion Control System and Method of a Magnetic Levitation Ball.

On Modeling and Control for A Maglev System

Stability Analyses on Dynamic Control for A Moving Body Levitated Magnetically over Elastic Guideways

Analysis And Design Of A Maglev Permanent Magnet Synchronous Linear Motor To Reduce Additional Torque In Dq Current Control

Study of repulsive permanent magnetic levitation mechanism and its dynamic characteristics

Design and control of a passive magnetic levitation carrier system