Abstract:The maglev linear motor has three degrees of motion freedom, which are respectively realized by the thrust force in the x-axis, the levitation force in the z-axis and the torque around the y-axis. Both the thrust force and levitation force can be seen as the sum of the forces on the three windings. The resultant thrust force and resultant levitation force are independently controlled by d-axis current and q-axis current respectively. Thus, the commonly used dq transformation control strategy is suitable for realizing the control of the resultant force, either thrust force and levitation force. However, the forces on the three windings also generate additional torque because they do not pass the mover mass center. To realize the maglev system high-precision control, a maglev linear motor with a new structure is proposed in this paper to decrease this torque. First, the electromagnetic model of the motor can be deduced through the Lorenz force formula. Second, the analytic method and finite element method are used to explore the reason of this additional torque and what factors affect its change trend. Furthermore, a maglev linear motor with a new structure is proposed, with two sets of 90 degrees shifted winding designed on the mover. Under such a structure, the mover position dependent periodic part of the additional torque can be offset. Finally, the theoretical analysis is validated by the simulation result that the additionally generated rotating torque can be offset with little fluctuation in the proposed new-structure maglev linear motor. Moreover, the control system is built in MATLAB/Simulink, which shows that it has small thrust ripple and high-precision performance.

Analyzing and Optimizing Design of Current-Loop in the Magnetic Levitation Controller on Maglev Vehicle

Design of Single-Sided Linear Induction Motor for Low-Speed Maglev Vehicle in 160 Km/h and Variable Slip Frequency Control

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

Current Control for the Single Degree of Freedom Linear Maglev System

Decoupling control algorithm of magnetic suspension system based on current optimization

Real-Time Adaptive Control of a Magnetic Levitation System with a Large Range of Load Disturbance

Accurate Two-Degree-of-freedom Discrete-Time Current Controller Design for PMSM Using Complex Vectors

Analysis And Design Of A Maglev Permanent Magnet Synchronous Linear Motor To Reduce Additional Torque In Dq Current Control

Analysis of Multiple Equilibrium Points and Research on the Stability of Fixed-current Control in Maglev System

Current Control Method for Magnetic Suspension System

Overview of Current Loop Control Technology for Permanent Magnet Synchronous Motor Servo System

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

H∞ controller for an active magnetic ball levitation system

Design and control of a passive magnetic levitation carrier system

Inner Loop Design for PMLSM Drives with Thrust Ripple Compensation and High-Performance Current Control

An Optimizing Method of Complex PI Controller for Permanent Magnet Synchronous Motor in Magnetic Saturation

Adaptive Current-Loop Design for an ElectroMagnetic Suspension System

Technology For Current Loop Decoupling Control Of Pmsm

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Design of A Control System for A Maglev Planar Motor Based on Two-Dimension Linear Interpolation

Current Loop Deviation Decoupling Control System of Permanent Magnet Synchronous Motor in Vehicle Application